Indicator
Name
●
●
System
Message
Indicator
●
Turn Signal
and Hazard
●
Warning
Indicators
●
High Beam
Indicator
●
Lights On
Indicator
●
Fog Light
Indicator
*
*1:Models with the smart entry system have an ENGINE START/STOP button instead of an ignition switch.
* Not available on all models
On/Blinking
Comes on for a few seconds when you
turn the ignition switch to ON
goes off.
Comes on along with a beep when a
problem is detected. A system message on
the i-MID appears at the same time.
Blink when you operate the turn signal
lever.
Blink along with all turn signals when you
press the hazard warning button.
Comes on when the high beam headlights
are on.
Comes on whenever the light switch is on,
or in AUTO
*
when the exterior lights are
on.
Comes on when the fog lights are on.
Explanation
While the indicator is on, press the
●
*1
, then
(
w
(display/information) button to
see the message again.
Refer to the Indicators information in
●
this chapter when a system message
appears on the i-MID. Take the
appropriate action for the message.
The i-MID does not return to the normal
●
screen unless the warning is canceled,
or the
button is pressed.
Does not blink or blinks rapidly - A
●
turn signal light bulb has blown.
Change the bulb immediately.
2 Replacing Light Bulbs
P. 365, 367
If you remove the key from the ignition
●
switch
*1
while the exterior lights are on,
a chime sounds when the driver's door
is opened.
uuIndicatorsu
Message
—
—
—
—
—
—
—
Continued
73