Connecting To An Antenna; Plug & Play (Initial Setup) - Samsung 403 User Manual

Getting Started
When the TV is initially powered on, basic settings proceed automatically.
✎
Connecting the power cord and antenna.
✎
The position of power input port may differ depending on the model.
TV Rear Panel
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the
POWERP button. Plug & Play is available only when the Input source is set to TV.
✎
To return previous step, press the red button.
1
Selecting a language
2
Selecting store Demo
or home Use
3
Selecting an antenna
4
Selecting a channel
5
Setting the clock
6
Enjoy your TV.
If You Want to Reset This Feature...
O
MEnUm → setup → Plug & Play → EnTERE
6
English

Connecting to an Antenna

Plug & Play (Initial Setup)
Press the ▲ or ▼ button, then press the EnTERE button.
Select the desired OSD (On Screen Display) language.
Press the ◄ or ► button, then press the EnTERE button.
y Select the home Use mode. store Demo Mode is for retail
environments.
y Return the unit's settings from store Demo to home Use
(standard): Press the volume button on the TV. When you see the
volume in the OSD, press and hold
Press the ▲ or ▼ button, then press the EnTERE button. Select Air, sTD, hRC or IRC.
Press the EnTERE button to select start. The channel search will start automatically.
For more information, refer to Channel → Auto Program. (p.11)
✎
Press the EnTERE button at any time to interrupt the memorization process.
Press the ◄ or ► button to select Month, Day, Year, hour, Minute or am/pm.
Set these by pressing the ▲ or ▼ button.
Press the EnTERE button.
VHF/UHF Antenna
Cable
or
MEnU for 5 sec.
POWER
P
P.SIZE
SRS
DUAL
SUBT.