Table of Contents
Advertisement
NOTE:
AUTO ADJUST is only available when you use the analog (VGA) connector.
2.
Push the
and
buttons to move between the setting options. As you move from one icon to another, the option name is highlighted. See the
following table for a complete list of all the options available for the monitor.
3.
Push the
button once to activate the highlighted option.
4.
Push
and
button to select the desired parameter.
5. Push
to enter the slide bar and then use the
6.
Select the
option to return to the main menu or exit the OSD menu.
Icon
Menu and
Submenus
Brightness/Contrast Use this menu to activate Brightness/Contrast adjustment.
Brightness
Contrast
Dynamic Contrast
Auto Adjust
and
Brightness adjusts the luminance of the backlight.
Push the
button to increase brightness and push the
Adjust Brightness first, and then adjust Contrast only if further adjustment is necessary.
Push the
button to increase contrast and push the
The Contrast function adjusts the degree of difference between darkness and lightness on the monitor screen.
Dynamic Contrast adjusts the contrast ratio to 10000:1.
Push the
button to select the Dynamic Contrast "On" or "Off" .
Even though your computer recognizes your monitor on startup, the Auto Adjustment function optimizes the display settings for use
with your particular setup.
Auto Adjustment allows the monitor to self-adjust to the incoming video signal. After using Auto Adjustment, you can further tune
your monitor by using the Pixel Clock
(Coarse) and Phase (Fine) controls under Image Settings.
buttons, according to the indicators on the menu, to make your changes.
Description
button to decrease brightness (min 0 ~ max 100).
button to decrease contrast (min 0 ~ max 100).
Hide quick links:
Advertisement
Table of Contents
