Advertisement
*IMPORTANT*
Please Review Carefully Before Installing Your New
Corona Discharge Ozone Generator.
Be sure to:
1. Mount unit under the spa skirt, as high on the wall as possible.
2. Unit must be mounted vertically.
3. Please verify that the JED CD Ozonator (120V or 240V) matches
your power source voltage, V.
4. Install second check valve between the venturi injector and ozone
generator.
We recommend that you:
1. Mount the venturi injector near the top of the spa skirt with the
tubing sloping downward from the injector outlet.
2. Incorporate two Hartford loops above the water line if possible.
Please Note:
For all models, excluding the JED 203
&
603, suction is
required to get ozone into the water. The ozone generators
depend on vacuum from a venturi injector. They produce no
airflow themselves. The ozonator must have air drawn
through
it.
The ozonator should only have power when suction
is available or it may fail prematurely. Check suction
periodically. Proper suction will increase the performance and
longevity
of your
ozonator.
Advertisement
