Cisco TOPSPIN SFS 3012 Quick Start Manual page 20

Multifabric server switch

Hide thumbs Also See for TOPSPIN SFS 3012:

Table of Contents

Use InfiniBand cables to connect the HCA in your host to the InfiniBand switch card of your Topspin

360. To plug in an InfiniBand cable, push the connector into the interface until you hear/feel a click.

Figure 1-9: Fully Installed IB Cable with Pinch Connector

Figure 1-10: Fully Installed IB Cable with Pull Connector

NOTE: If your host does not provide an ample amount of free space around a given IB port,

double-check that your IB cable connector engages fully. Wiggle your connector back and forth to be

sure that both sides of the connector have locked firmly into place.

Table of Contents