Navigate To An Address - Omnitech 15223 User Manual

Actions
Tap the Actions button to use an address:
Figure 6 – Actions for Addresses
As Starting Point, which designates the selected address as the route origin (This works only when
•
you have an invalid GPS signal).
To Show on Map, which displays the selected address on the map.
•
As saved address – Tap to add an address to your list of favorite locations. For more information
•
about favorites, see Address Book on page 12.
To see information – Tap to display additional address information and phone number (where
•
available).

Navigate to an Address

Figure 7 – Show on Map
The final step in the address entry is the GO
screen. Here you can validate your address and
you can select from the following route types:
Quickest – This option selects the route that
takes the least amount of time. Quickest is the
default setting.
Shortest – This option selects the route that is
shorter in distance. Note: The shorter route may
not always be the quickest.
Go – When you tap the Go button, the device
calculates the route to your selected destination.
Demo – Tap the
simulated route.
icon to start navigating a
7