DESCRIPTION
The DFR22 Audio Processor with Feedback Reduction is a 2-input, 2-output digital audio processor. It is designed to equalize sound system re-
sponse, provide dynamics processing and alignment delay, and automatically detect and control acoustic feedback. A built-in 2 X 2 matrix mixer
allows either or both inputs to be routed to either or both outputs, with additional controls for levels and polarity.
The DFR22 is ideal for installed sound reinforcement applications, such as houses of worship, theaters, and meeting facilities. It is also a powerful
setup tool in live music applications. Using the DFR22's drag-and-drop graphical user interface, processors can be placed anywhere in the signal
path.
DFR22 Features
1. Shure's patented digital feedback reduction algorithm:
•
Now includes stereo DFR processing capability
•
New Auto Clear mode clears dynamic filters after a preset
change or power cycle. Dynamic filters can be automatically re-
moved after a specified number of hours.
2. Configurable signal path with drag and drop Windows interface.
Includes graphic and parametric EQ, up to 10 seconds of delay,
compression, limiting, gating, automatic gain control, ducking, and
a fully configurable two-way crossover.
3. Phoenix and XLR connectors for each input and output
4. Compatible with USB to serial port converters.
5. Front and back panel RS232 ports:
PACKING LIST
•
Power Cable
•
5-pin DIN ShureLink Cable
•
4 Rackmount Screws with Nylon Washers
•
Five 3-Pin Block Connector Terminals (for audio input/output
and RS-232 communication)
REQUIREMENTS
Power Requirements
•
100-240 Vac, 50/60 Hz
•
45 W maximum
Computer Requirements
•
20 MB of hard drive space
•
CD ROM drive
•
RS-232 serial port and cable, or approved USB-to-Serial port
adapter*
•
VGA monitor with 640 x 480/256 color, or higher resolution
•
Mouse or other pointing device
•
Mouse or other pointing device
*Most USB-to-serial port adapters work well with the DFR22. To see the latest list of fully approved adapters, visit http://www.shure.com/mixers/models/dfr22.asp
SOFTWARE INSTALLATION
1.
Insert supplied CD into your CD-ROM drive and follow the
on-screen instructions.
2.
If installation does NOT start automatically, click on the [Start]
button the Windows taskbar and select [Run...] from the pop-up
menu.
USING THE DFR22 SOFTWARE
Instructions for the DFR22 software are available in PDF format on the
CD-ROM included with the system, or on the Shure web site at
www.shure.com.
Windows Version
98, Second Edition
NT
ME
2000 Professional
XP Professional, Home
English
•
3-pin Phoenix connector on back panel.
•
DB9 connector on front panel; requires only TX, RX, and GND
to be connected.
6. Three pre-loaded presets:
•
Preset 1: Two mono 16 filter DFRs.
•
Preset 2: A stereo 16 filter DFR.
•
Preset 3: A mono 16 filter DFR on each input. Each input is rout-
ed to each output.
7. Preset selector and indicator for up to 16 presets
8. Control input pins for setting up remote preset, volume, and mute
controls
•
One 6-pin Block Connector Terminals (for control inputs)
•
One DFR22 Software CD-ROM and Online User Guide
NOTE: Processor speed and memory requirements vary, depending
on the version of Windows and number of background applications
you are running. Operating the DFR22 software simultaneously with
programs such as SIA-Smaart
processor and more RAM. The chart below lists the minimum require-
ments for running the DFR22 software with no other applications--
including virus protection, firewall, instant messaging, or email--in the
background.
Processor Speed
Pentium 166 MHz
Pentium 233 MHz
Pentium 300 MHz
Pentium 300 MHz
Pentium 300 MHz
3.
Type [D:/setup}, where "D" is your CD-ROM drive letter.
4. Click OK and follow the on-screen instructions.
NOTE: Register this product by filling out and mailing the
enclosed registration card, or register online at the Shure web
site (www.shure.com). Registration allows you to receive
information about software updates as they become available.
3
®
or Gold Line TEF'requires a faster
RAM
48 MB
64MB
64 MB
96 MB
128 MB