Table of Contents
Advertisement
Special Features
Interference Eliminator Code
Interference Eliminator Codes help minimize interference by providing you with a choice
of code combinations.
To set the code for a channel:
" MODE "
1. Press
twice until the code starts to flash.
+
2. Press
or
to select the code.
3. Press
to save the code setting.
You can set a different code for each channel using this procedure.
Note: You must set the Interference Eliminator Code to
Interference Eliminator Codes to communicate with other FRS radios that do not
have Interference Eliminator Codes.
Push to Talk Timeout Timer
To prevent accidental transmissions and save battery life, the radio emits a continuous
warning tone and stops transmitting if you press
Locking the Keypad
To avoid accidentally changing your radio settings, press and hold
until
displays. You can still turn the radio on and off, adjust the volume, receive, transmit,
send a call tone, and monitor channels. All other functions are locked. To unlock the radio,
" MODE "
press and hold
for 3 seconds or until
on an FRS radio that uses
for 60 continuous seconds.
" MODE "
is no longer displayed.
Special Features
Special Features
for 3 seconds or
17
Hide quick links:
Advertisement
Table of Contents
