Table of Contents
Advertisement
4.14 Switch the device ON or OFF
When an HDMI-CEC compliant device
is connected and TV switches to standby,
the device gets turned OFF automatically.
1
Press
2
Select [Setup] > [Features] >
[EasyLink]
[EasyLink] > [Auto turn off] >
3
Select [On] or [Off], then press OK
When an HDMI-CEC compliant device
is connected and TV is switched ON, then
the device gets turned ON automatically.
4.15 Search the connected devices
Search the HDMI-CEC compliant devices
connected to your TV and list them using
Device list.
1
Press
2
Select [Setup] > [Features] >
[EasyLink] > [Device Search] >
4.16 Control the device using TV
remote
Now use a single remote to control your
CEC enabled device.
1
Press
2
Select [Setup] > [Features] >
[EasyLink] > [Device Menu]
Pause
FR
FF
Play
Press
to select the function icon, press
OK button to confirm the function.
16 EN
4.17 Use Geometric
Use Geometric to automatically adjust phase
and Clock for VGA mode
1 Press
2 Select [Geometric], then press OK.
4.18 Use the Options menu
Visit options relevant to current action or
selection.
1
2
Prev.
Next
Stop
Smart Picture
Smart Sound
Picture Format
Freeze
Sleep Timer
Geometric
ADJUST.
This automatically adjust H & V-position,
Phase and Clock for VGA mode
Status
Energy Saving
Guide Bar
While you watch TV, press
OPTIONS.
The TV options menu appears.
Select one of the following options, then
press OK.
•
[Status]: Display information
concerning currently viewing
channel.
[Energy Saving]: Relevant setups.
to conserve energy.
•
Press
[Guide Bar] : Relevant menu
Press
to access menu bar.
Note : Guide Bar only applicable for
HDMI (CEC) & USB Source.
Advertisement
Table of Contents
