Appliance at a glance Contents Appliance at a glance..........Description of appliance and equipment....Range of appliance use..........Conformity..............External dimensions of the appliance....... Saving energy............HomeDialog............. General safety information........Controls and displays........... Operating and control elements....... Temperature display..........Putting into operation..........Changing over the door hinges........
General safety information Use the vacation function for longer vacation periods Climate for ambient temperatures of (see 5.4.4) . rating Accumulated dust increases the energy consumption: 10 °C to 32 °C Once a year, dust the refrigerating unit 16 °C to 32 °C together with the metal grille of the heat exchanger at the back of the appliance.
Controls and displays Danger of frostbite, numbness and pain: NOTICE* Avoid lasting skin contact with cold surfaces or refrigerated/ Risk of damage to side-by-side appliances due to condensation! frozen food or take protective steps, e.g. wear gloves. Do not When a side-by-side appliance (S…) is fitted together with a consume ice cream, water ice or ice cubes immediately and second appliance (as a SBS combination), the door hinges must do not consume them too cold.
Page 5
Putting into operation Fig. 7 (23) onto the new hinge side u Set the soft stop unit aside. u Screw the bearing bracket tightly to at least 4 Nm or retighten with the aid of a cordless 4.1.2 Detaching the door screwdriver if necessary.
Putting into operation Fig. 9 (23) onto the new hinge side Fig. 6 (12) in the door on the new u Screw the bearing bracket u Insert the upper turn hinge tightly to at least 4 Nm or retighten with the aid of a cordless hinge side.
Putting into operation Always install the appliance directly against the wall. Do not install the appliance without assistance. WARNING Standard EN 378 specifies that the room in which you install your Risk of injury due to the door dropping out! appliance must have a volume of 1 m per 8 g of R 600a refrig- If the bearing parts are not screwed into place firmly enough, the...
Control 5 Control u Align the appliance so that it stands firmly and on a level by applying the accompanying 5.1 Brightness of the temperature spanner to the adjustable- height feet (A) and using a spirit display level. u Then support the door: Extend You can adjust the brightness of the temperature display to the the adjustable foot at the turn light conditions of the room in which the appliance is installed.
Control 5.3.1 Muting the door alarm Cooling with SuperCool u Briefly press SuperCool button Fig. 3 (2) . The audible alarm can be muted when the door is open. The Fig. 3 (11) lights up in the display. w The SuperCool symbol sound switch-off function is active as long as the door is left open.
Control 5.4.7 Moving the storage rack u To prevent food spoilage due to transfer of germs: Store unwrapped animal and vegetable products separate from one u Remove storage rack according to illus- another in the drawers. This also applies to different sorts of tration.
Maintenance 5.5.6 Setting the humidity in the HydroSafe Standard values for storage time at high humidity Dates up to days Low humidity: move the regulator to the left. Strawberries up to days Figs up to days High humidity: move the regulator Blueberries up to days...
Malfunction - Only use food compatible cleaning and care agents on the inside of the appliance. Outside surfaces and interior: u Clean the plastic surfaces, outside and inside, by hand using lukewarm water and a little washing-up liquid. NOTICE* The stainless steel doors are provided with a high-quality surface coating and must not be treated using the accompanying care product.
Decommissioning Check power plug. Wait until the appliance reaches the required temperature itself. If not, contact the customer service. (see Mainte- → The fuse of the wall socket is not in order. nance). Check fuse. → The appliance is too close to a heat source. The compressor runs for a long time.
Need help?
Do you have a question about the 7084440 - 01 and is the answer not in the manual?
Questions and answers