Ultrative GSP1000 User Manual page 18

Ultrative gprs/sms wireless printer sms printer
Table of Contents

Advertisement

Question 2: The battery is not chargeable.
Reason: The Battery or the charger is bad.
Solution: Replace the battery or charger by another one.
Question 3: Signal weak or no signal
Reason: Use terminal in GSM Signal blind area. For example, the terminal is
installed nearby high building or basement where wireless electric wave can't
transmit enough.
Solution: Avoid this period using it. Move the antenna to some place where the
signal is strong enough.
Question 4: There is cacophony or reecho while calling.
Reason:
The relay line of net is bad that belongs to area question.
The calling line is not good in some area.
Solution: Hang up and dial again. Maybe the relay line will change a better one.
Question 5: Outgoing or incoming call is normal, but can't send SMS.
Reason: SMS service centre number is wrong.
Solution: Reset the right SMS service centre number.
Question 6: Notice there is no card.
Reason:
Be sure there is no card in the terminal.
It is not good for SIM card metal interface.
Solution: Check the SIM card is in or not, if is in. Please rub card metal interface
and insert it again.
Question 7: Time the terminal is keeping open becomes short.
Reason: Need changing new battery.
Solution: Change new battery.
Question 8: Can't connect network.
Reason 1: It is a forbidden number.
Solution 1: Having set forbidden numbers or forbidden long-distance call.
Reason 2: Signal weak
GPRSWireless Printer User Manual V1.1
18

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gsp1010

Table of Contents