Do you have a question about the Aquarius WF101 and is the answer not in the manual?
Questions and answers
Bernard
April 13, 2025
The start button lights blinks along with the enhanced button lights and won't start
1 comments:
Mr. Anderson
April 13, 2025
If the Start and Enhanced button lights blink and the Hotpoint Aquarius WF101 washing machine won't start, it likely means the Start/Cancel button has not been pressed and held for at least 3 seconds. Press and hold the Start/Cancel button until the machine begins to operate. Also, ensure the appliance door is closed properly and the cold water supply tap is turned on.
This answer is automatically generated
Joan Heelan
March 16, 2025
Machine is WF321. When I press start, the door locks, the appropriate light comes on on the dashboard, but nothing happens. Tried a wash cycle, a drain cycle and just a spin cycle. All behave the same. The appropriate light comes on, but nothing happens
1 comments:
Mr. Anderson
March 16, 2025
If the Hotpoint Aquarius WF101 washing machine door locks and the "Door Locked" indicator light is flashing, but the machine does not start a cycle, the issue could be that the door is not properly closed. To resolve this:
1. Ensure the door is firmly closed. 2. Try opening and closing the door again before restarting the machine.
If the issue persists, there may be a fault with the door locking mechanism.
Need help?
Do you have a question about the Aquarius WF101 and is the answer not in the manual?
Questions and answers
The start button lights blinks along with the enhanced button lights and won't start
If the Start and Enhanced button lights blink and the Hotpoint Aquarius WF101 washing machine won't start, it likely means the Start/Cancel button has not been pressed and held for at least 3 seconds. Press and hold the Start/Cancel button until the machine begins to operate. Also, ensure the appliance door is closed properly and the cold water supply tap is turned on.
This answer is automatically generated
Machine is WF321. When I press start, the door locks, the appropriate light comes on on the dashboard, but nothing happens. Tried a wash cycle, a drain cycle and just a spin cycle. All behave the same. The appropriate light comes on, but nothing happens
If the Hotpoint Aquarius WF101 washing machine door locks and the "Door Locked" indicator light is flashing, but the machine does not start a cycle, the issue could be that the door is not properly closed. To resolve this:
1. Ensure the door is firmly closed.
2. Try opening and closing the door again before restarting the machine.
If the issue persists, there may be a fault with the door locking mechanism.
This answer is automatically generated