Advertisement
Built-in Multiplexing Capability
Using a built-in multiplexing capability, up to 9
camera images (HSR-J2009/J2009P) or up to 16
camera images (HSR-J2016/J2016P) can be recorded
and monitored independently. Multiple monitoring
patterns, such as full screen, 4-, 9-, and 16-division
split screens are available, and live camera images can
be sequentially switched at intervals of 1 to 30
seconds. In addition to these monitoring patterns,
you can set up an "Option Screen,"
screen in the lower right corner of the display, that
can be used to display either a live camera image or
recorded image.
16-division split screen is supported only on the
*6
HSR-2016/2016P.
A live camera image cannot be displayed in the Option
*7
Screen during playback.
External RAID Unit Connectivity
Equipped with a SCSI interface, the HSR-J series can
be connected to an external RAID unit
is ideal when recording for a long period of time and
for backing up data. Users can easily access image
data recorded to the external RAID unit using the
HSR-J series search function.
When using an external RAID unit, please make sure to
*8
use an Uninterruptible Power Supply (UPS).
The RAID unit and the HDDs built into this unit cannot be
used simultaneously. Please contact your nearest Sony
office or authorized dealer for more details.
Easy Setup and Easy Operation
The HSR-J series offers an "Easy Setup" menu, which
gives users quick access to normal recording settings,
such as frame rate, recording duration, picture quality,
and timer recordings on a single menu page. Once
the appropriate parameters have been input, the
system is automatically configured.
For easy connections, a Video OUT and a USB port
are located on the front panel allowing users to
quickly connect to external devices such as a monitor
and recorder.
Comprehensive Recording and
Playback Features
Alarm Recording
With its flexible alarm recording settings, the HSR-J
series provides a high level of functionality during
alarm incidents. When the recorder detects an alarm,
either internally (via its built-in activity detection
sensor) or externally, the unit will automatically switch
to alarm recording mode. A pre-alarm mode, which
plays back images recorded before the alarm was
triggered, is also available.
Timer Recording
Timer recording can be activated on a weekly or daily
basis, with a maximum of eight timer settings.
Programmed Recording
The HSR-J series has a programmed recording
*6
function that allows you to preset up to four
programs and recall them easily via the menu.
Within each of the four programs, you can specify
the preferred camera inputs and the recording rate of
*7
a larger sub
each camera. These programs can also be used in
combination with timer and alarm recording features.
Playback During Recording
The HSR-J series allows you to view previously
recorded images without having to stop recording.
Intelligent Search Function
The HSR-J series features six search functions that
allow you to quickly locate and review required
segments: alarm log search, alarm search, alarm
thumbnail search, time/date search, archive area
*8
. This feature
search, and activity detection search.
Alarm Log Search GUI screen
Activity Detection Function
The HSR-J series is equipped with an activity
detection sensor that is designed to recognize
changes in luminance. The sensor is based on a
10 x 14 grid on the monitor, and ten levels of
sensitivity are selectable. If a change in luminance is
detected in the assigned area of the grid, an alarm is
triggered and recording is activated.
Activity Search On Recorded Data
The HSR-J series has the capability to perform an
activity search on recorded data. Users can set an
activity grid within the recorded material to search
only the scenes in which activity was detected within
that specified area.
Advertisement
