Summary of Contents for Dri-Eaz DefendAir HEPA 500
Page 1
HEPA 500 ® Air Scrubber 115v Model Quick Reference Table of Contents How the DefendAir HEPA 500 works (pg. 2) Getting to Know Your New DefendAir HEPA 500 (pg. 2) • Location of key features Operating Instructions (pg. 3) • Set-up •...
0.3 microns. directly into matching grounded What makes the Dri-Eaz DefendAir HEPA 500 unique is its Clean Air Delivery Rate receptacle. (CADR) capability. CADR is an Association of Home Appliance Manufacturers’...
Filter Relocate the unit and plug it into a different outlet. Then push the “reset” button, and panel check to see if it’s operating; if so, continue use, if not call a Dri-Eaz Technical Specialist at 800-575-5152. The Filters FIGURE 3...
To learn more about these, contact a Dri-Eaz Technical Specialist at 800- 575-5152. Use for Water Damage In a standard Category 1 water damage situation, place the DefendAir HEPA 500 in WARNING the middle of the affected area. Utilize airmovers to lift particles into the air. The HEPA 500 filters the air in the affected area to reduce particle levels during the restoration process.
• Inspect the electrical cord for damage. Look for fraying, cuts, etc. Do not use the unit if you find any. Call Dri-Eaz for the nearest Service Center. • Check your GFCI protection. Plug the unit in and turn it on, depress the red GFCI “Test”...
Note:To be assured of true HEPA filtration, change the HEPA filter after every water damage job, or when the indicator light comes on; whichever occurs first. When using the DefendAir HEPA 500 for remediation: After every job • Replace both the filters to prevent cross-contamination.
Need help?
Do you have a question about the DefendAir HEPA 500 and is the answer not in the manual?
Questions and answers