1110 Lcd Unit - Lenovo V560 Hardware Maintenance Manual

Lenovo V560/B560 Hardware Maintenance Manual

1110 LCD unit

For access, remove these FRUs in order:
• "1010 Battery pack" on page 37
• "1020 Dummy card" on page 38
• "1030 Hard disk drive(HDD)/Memory/Mini PCI Express Card slot
• "1040 Hard disk drive" on page 40
• "1050 Optical drive" on page 41
• "1060 DIMM" on page 42
• "1070 PCI Express Mini Card for wireless LAN/WAN" on page 43
• "1080 Keyboard" on page 45
• "1090 Keyboard bezel" on page 47
• "1100 System board" on page 51
Figure 11. Removal steps of LCD unit
Release the antenna cables from the cable guides in the direction shown by
arrows
When installing:
•
•
54
compartment cover" on page 39
. Remove two screws
1
Step Screw (quantity)
M2.5 × 8 mm, flat-head, nylok-coated (2)
2
Route the antenna cables along the cable guides. As you route the cables,
make sure that they are not subjected to any tension. Tension could cause
the cables to be damaged by the cable guides, or a wire to be broken.
Make sure that the LCD connector is attached firmly and make sure that you
do not pinch the antenna cables when you attach the LCD assembly. Route
the LCD cable along the cable guides.
.
2
2
1
1
1
2
Color Torque
Black 3.0 kgfcm