Maintenance; Battery Removal - Remington Shortcut clipper SCC-100R Use And Care Manual

Maintenance

This appliance has no user service-
able parts.
The following procedure should be
followed for battery removal prior to
disposing of the product:
1. Make sure the clipper is unplugged
from any outlets so you don't risk
an electrical shock.
2. With a flat head screwdriver, gently
pry the top cover from the unit. This
will expose the internal circuitry
compartment.
3. With a Phillips head screwdriver,
remove the four screws on the
circuitry compartment top cover.
10
Maintenance

Battery Removal

Storage
■ Always store this appliance and
cord-adapter in a moisture-free
area. Do not store it in temperatures
exceeding 140°F (60°C).
■ Do not wrap the cord around the
appliance.
4. Locate 6 latches around the
perimeter of the circuitry
compartment and pry each to
loosen top cover.
5. Remove cover to expose the
batteries and circuitry.
6. Clip the wires connecting the
batteries to the circuit board and
remove the batteries.