Asus EB1036 User Manual page 51

Right-click on the LAN controller then select Properties.
5.
Click Internet Protocol Version 4(TCP/IPv4) then click
6.
Properties.
7. Configure the type of IP address for network configuration.
To configure using a dynamic IP address:
a.1 Click Obtain an IP address automatically then click OK.
a.2 Proceed to step 8.
To configure using a static IP address:
Click Use the following IP address.
b.1 Click
b.2 Type the IP address, Subnet mask and Default gateway from Type the IP address, Subnet mask and Default gateway from
your service provider.
b.3 If needed, you can also type the preferred DNS server
address and alternate DNS server address then click OK.
b.4 Proceed to step 8.
Return to the Network and Sharing Center window then click
8.
Set up a new connection or network.
Select Connect to the Internet then click Next.
9.
10. Click Broadband (PPPoE).
11. Key-in your User name, Password, and Connection name then
click Connect.
12. Click Close to finish the configuration.
13. Click on the taskbar then click the connection you just
created.
14. Key-in your user name and password then click Connect to start
connecting to the Internet.
EB1036 PC
51