Picture and video settings
1
Press
(Home).
2
Select [Setup], and then press OK.
3
Select [Video], and then press OK.
4
Press the Navigation buttons and OK to
select and change:
[TV display]: Select a picture format to
•
fit the TV screen.
[HDMI video]: Select the resolution of
•
video signal that is output from HDMI
OUT (ARC) on your home theater.
To enjoy the selected resolution,
make sure that your TV supports the
selected resolution.
•
[HDMI Deep Color]: Recreate the
natural world on your TV screen by
displaying vivid images using billion
colors. Your home theater must be
connected to a Deep Color enabled
TV through an HDMI cable.
[Picture settings]: Select pre defined
•
color settings for the video display.
[Watch 3D video]: Set HDMI video to
•
support 3D or 2D video.
Note
•
If you change a setting, make sure that the TV supports
the new setting.
Audio settings
1
Press
(Home).
2
Select [Setup], and then press OK.
3
Select [Audio], and then press OK.
4
Press the Navigation buttons and OK to
select and change:
[Night mode]: For quiet listening,
•
decrease the volume of loud sounds
on your home theater. Night mode
is only available in DVDs and Blu-ray
EN
24
discs with Dolby Digital, Dolby Digital
Plus, and Dolby True HD soundtracks.
•
[HDMI audio]: Set the HDMI audio
output from your TV.
[Default sound settings]: Restore
•
the equalizer settings of all the sound
modes to the default values.
Parental control settings
1
Press
(Home).
2
Select [Setup], and then press OK.
3
Select [Preference], and then press OK.
4
Press the Navigation buttons and OK to
select and change:
[Change Password]: Set or change
•
your password for parental control
access. If you do not have a password
or have forgotten your password, enter
0000.
[Parental control]: Restrict access
•
to discs that are recorded with age
ratings. To play all discs, irrespective of
the ratings, select 8 or [Off].
Display settings
1
Press
(Home).
2
Select [Setup], and then press OK.
3
Select [Preference], and then press OK.
4
Press the Navigation buttons and OK to
select and change:
[Auto subtitle shift]: Enable or disable
•
automatic repositioning of subtitles on
TVs that support this feature.
•
[Display panel]: Set the brightness of
the home theater front panel display.
[VCD PBC]: Enable or disable the
•
content menu navigation of VCD and
SVCD discs with Play Back Control
feature.