Summary of Contents for JETWAY JetPad
- Page 1 JetPad User’s Manual www.jetway.com.tw Manual Vision: 1.6 Release Date：August, 2011...
-
Page 2: Package Contents
User’s Notice Copyright of this manual belongs to the manufacturer. No part of this manual, including the products and software described in it may be reproduced, transmitted or translated into any language in any form or by any means without written permission of the manufacturer. -
Page 3: Safety Instruction
Safety Instruction Operate the product according to the correct installation steps and with great care to make sure safety and comfort using experience. Please refer to the following safety instruction guide to avoid danger of electric shock or fire. Abide by the previous safety instruction guide to use and maintain the product and the hard disk to make sure of safe operating environment. - Page 4 Make sure that the thermal louver of the product is not blocked. Make sure to remove the power plug from the product when there is a thunder storm. Please remove the power plug from the product when you are not going to use the product for a long time. Make sure to set up or use the product on a stable surface.
-
Page 5: Table Of Contents
TABLE OF CONTENT CHAPTER 1: BRIEF INTRODUCTION ............- 2 - 1.1 P ....................- 2 - RODUCT VERVIEW 1.2 B ..................- 3 - & C UTTONS ONNECTORS CHAPTER 2: PREPARATION BEFORE USING THE PRODUCT....- 4 - 2.1 H ................ -
Page 6: Chapter 1: Brief Introduction
Chapter 1: Brief Introduction Product Overview USB connector OTG connector Camera Volume- Menu Button Volume+ Power button Option Menu Power connector Escape TF card reader Speaker Earphone - 2 -... -
Page 7: Buttons & Connectors
Buttons & Connectors Name Function Power button Press for a long time to power on/off; Press for a short time to lock the screen or wake up the screen Volume + Press to increase the volume Volume - Press to decrease the volume Escape Escape: Press to return to upper menu Option Menu... -
Page 8: Chapter 2: Preparation Before Using The Product
Chapter 2: Preparation before Using the Product How to power on the device The device will automatically power off when connected with power adapter. When the device is off, press Power button for 3 seconds long for system to enter Android Start-up Status Bar. It takes about 30 seconds for the desktop to show up. -
Page 9: How To Power Off The Device
to power the device, not to charge it). Power Saving Mode and Screen Lock: Press Power button slightly after system starting-up to enter Sleep power-saving mode. Press Power button again and to light the screen in 1 second. Notice: In power-saving mode the previous operations are still valid and will continue, e.g. -
Page 10: How To Use Tf Card
How to use TF card User will find two removable disks after connecting the device to PC. The first one being the memory card of expansion slot and the latter being internal memory disk of the device. User can not access to the first disk if no memory disk is inserted in card reader. -
Page 11: User S Interface
the device is in charging status. Please wait until the device is fully charged before unplugging charger. Charging LED indictor will turn light blue when charging process is completed. The battery icon will stay still on desktop as well. Notice: Please contact your local dealer for specialized charger (5V-2A output). - Page 12 Notice: Some function logo only appears when application is enabled. User’s Interface may look different if you rearrange the icons. - 8 -...
-
Page 13: Function List
Function List Icon & Function Click to return to home page System is downloading item Ethernet Connection is off 3G network is on 3G signal strength 3G network is off Ethernet Connection is on WIFI signal strength Battery icon to show remaining battery power - 9 -... - Page 14 Alarm clock is set To decrease volume To increase volume Escape icon to return to previous page Settings Google Engine Music play bar Function module menu To switch from desktops - 10 -...
-
Page 15: Chapter 3 Operation Guide
Chapter 3 Operation Guide Language & Keyboard Settings Click ‘Menu’ icon to enter function menu, or click ‘Settings’ icon upon desktop, then click ‘Settings’ →‘Language & keyboard’ →‘Select language’ to find and select device interface language. Click ‘Setting’ to enter Settings page. - 11 -... - Page 16 Click ‘Language & keyboard’. Find and click ‘Language & keyboard’ on ‘Settings’ menu. Click ‘Select language’. - 12 -...
- Page 17 User can pull up or pull down to view available language options and click to select specific language for device user interface language. - 13 -...
-
Page 18: Wi-Fi Settings
Wi-Fi Settings Click ‘Menu’ icon to enter function menu, or click ‘Settings’ icon upon desktop. Click ‘Menu’ ‘Setting’ logo enter user’s interface - 14 -... - Page 19 Click ‘Setting’ to enter Settings page. Click ‘Setting’ to enter Settings page. - 15 -...
- Page 20 Click ‘Wireless & networks’. Click ‘Wireless & networks’. - 16 -...
- Page 21 Click “Wi-Fi” to enable WIFI function Click “Wi-Fi settings” to further set Wi-Fi function Click “Wi-Fi” to enable WIFI function. Click ‘Wi-Fi settings’. System will auto search WIFI network. As the following photo shows one network has been found: - 17 -...
- Page 22 Click available Wi-Fi network name Click the WIFI network name to connect, e.g., click ‘Jetway-9F’ and a notification page will show up to inform you to enter WIFI password. - 18 -...
- Page 23 Put in Wi-Fi network password 完成 （ ） Click ‘ ’ Finished after putting in password Click ‘完成’ after correct password entered. System will auto connect network. - 19 -...
- Page 24 Connecting status: ‘Connected’ Message ‘Connected’ will show up if connection is made. Connecting status information will show up when clicked, as the above photo shows. - 20 -...
-
Page 25: Static Ip Address Settings And Connection
Static IP address settings and connection If the AP router can’t support DHCP service, user needs to set the IP address for this device. 1. Click setting icon 2. Click ‘Advanced’ Click icon on the top right corner of the screen. Click ‘Advanced’. - Page 26 Click to use static IP Click ‘Use Static IP’. Input Static IP address. For example: IP Address: 192.168.1.200 Gateway: 192.168.1.255 Netmask: 255.255.255.0 - 22 -...
- Page 27 Static IP information Information will show after static IP are made successfully, as the above photo shows. - 23 -...
- Page 28 1. Click setting icon 2. Click ‘Save’ Save Static IP address setting: Click icon on the top right corner of the screen then click ‘Save’, as the following photo shows: - 24 -...
- Page 29 Put in Wi-Fi network password After all settings made please return to click the WIFI network name to connect, e.g., click ‘Jetway-9F’ and a notification page will show up to inform you to enter WIFI password. Click ‘完成’ after correct password entered.
- Page 30 Connecting status: ‘Connected’ Click ‘Connect’, system will auto connect network. Message ‘Connected’ will show up if connection is made. Connecting status information will show up when clicked, as the above photo shows. - 26 -...
-
Page 31: Usb Host Function
USB HOST Function The tablet PC comes with an OTG (On-The-Go) connector to realize data transmission between digital devices with HOST function. User just needs to connect the smaller end of OTG cable to OTG connector of tablet PC and the other end functions as USB connector to connect with compatible USB devices (such as USB disk, keyboard, mouse, 3G wireless card dongle, USB to Fast Ethernet Adapter, etc.). -
Page 32: Network Function
Click ‘USB’ to access to USB disk. 3G Network Function Notice: User needs to disable Wi-Fi function before using 3G network function. 3.5.1Plug-in 3G USB Dongle: Connect 3G wireless card Dongle to OTG connector with OTG cable for network connection. 3.5.2Plug-in Ethernet Adapter: Connect USB to Fast Ethernet Adapter with OTG cable for fast Ethernet network connection. - Page 33 Click ‘Wireless & networks’. Click ‘Wireless & networks’. - 29 -...
- Page 34 Click ‘Ethernet settings’. Click ‘Ethernet settings’. - 30 -...
- Page 35 Click to enable Ethernet function Click to enable Ethernet function. - 31 -...
-
Page 36: Apk Installer
APK Installer User can install third party programs developed on Android 2.3 operating system through ‘APK Installer’. User only needs to store them in ‘Internal Memory’ of the device or T-Flash card /External USB storage device and install them, or install programs directly automatically through ‘Android Market’... - Page 37 Internal Memory: Embedded flash memory disk of the device; SD Card: T-Flash memory card. Choose APK programs in the right frame of the interface, click to install. Return to main interface when installation finished. Corresponding program will show as well. Click to select in the right frame the program you wish to install...
- Page 38 3.6.3To manage programs: Return to ‘APK Installer’ and click [Manage], then click third party program to enter interface. For example: Skype 1.0.0.983 - 34 -...
- Page 39 Click to run the program Click to export the program to T-Flash card Click to uninstall the program Click to cancel operation Launch: to run the program. Export: to export the program to T-Flash card. Uninstall: to uninstall the program. Cancel: to cancel operation.
-
Page 40: Explorer
Explorer Click ‘Explorer’. Click ‘Explorer’ icon on main menu or desktop to enter management interface. - 36 -... - Page 41 Click one of them to unfold pull-down folders/files Click [TF Card] / [Internal Memory] / [USB] to unfold and view pull-down folders or files. - 37 -...
- Page 42 1. Click ‘Editor’ can also edit selected file/folder. 2. Press & hold a file/folder for a while for ‘Editor’ menu to pop up. User can press upon a folder or file and hold for a while, or click ‘Editor’ to edit the file. Some operations like ‘Copy’, ‘Delete’, ‘Move’, , ‘Paste’...
-
Page 43: Sound Recorder
Sound Recorder Click ‘Sound Recorder’ icon on main menu or desktop to enter sound recording interface. Click ‘Sound Recorder’ - 39 -... - Page 44 1. Click to start 2. Click to play 3. Click to stop Sound Recording Interface Icon Function Click to start recording sound Click play sound just recorded Click to stop recording sound Before exit, system will ask if you wish to ‘Use this recording’ or ‘Discard’.
-
Page 45: Browser
Browser Click ‘Browser’ When WIFI connection is working properly (refer to WIFI settings), click ‘Browser’ to enter Internet Explorer interface. Enter web address in Address Bar, and then click ‘Go to’ to enter webpage to browse information of the page. - 41 -... - Page 46 For example: - 42 -...
- Page 47 - 43 -...
-
Page 48: Android Market
3.10 Android Market User can install third-party programs compatible with Android 2.3 OS through APK Installer, or download & install them from ‘Android Market’. Click ‘Market’ When WIFI connection is working properly (refer to WIFI settings), click ‘Market’ to enter Android Market interface. - 44 -... - Page 49 Option1. Click ‘Create’ to create a Google Account if you don’t have one. Option2. Click ‘Sign in’ to sign in with your Google Account if you already have one. The first time you enter Android Market, you need to add a Google account.
- Page 50 Click ‘Apps’ to view and download applications. Click ‘Games’ view download games. Click ‘My apps’ to view downloaded item status. There are three options on the screen: Apps: Click ‘Apps’ to view and download applications. Games: Click ‘Games’ to view and download games. My apps: Click ‘My apps’...
- Page 51 Click to select the category of the application /game you wish to download. Click the category of the application/game you wish to download. In the case of ‘Reversi Free’, click ‘All Games’. - 47 -...
- Page 52 Click to select the game/application you wish to install. Click ‘Reversi Free’. - 48 -...
- Page 53 Click ‘Install’ to begin installing process. When the above installation page show up, click ‘Install’. To accept permissions, click ‘OK’. System will remind you ‘Your item will be downloaded’. - 49 -...
- Page 54 Download Status Pull up to exit from download status page User can drag down the download item , or click icon on Android Market interface page to view download status. - 50 -...
-
Page 55: Chapter 4: Hardware Configuration
Chapter 4: Hardware Configuration Hardware Specification Processor Rockchip RK2918 Cortex A8 1.2GHz Hardware 1080P video decoding for H.264, VP8, RV, WMV, AVS, H.263, MPEG 4 etc. Decoding Memory DDR3 512MB Hard Disk 4GB/ 8GB NAND Flash (OPTION) 7'' 800×600 resolution (aspect ratio Display 4:3 ), Capacitive touch panel, 5 point Multi Touch... - Page 56 Features Mobile Storage Can be used as USB Storage Support USB mouse, Keyboard, Pen driver, 3G dongle, USBLAN MP3, WAV, WMA, OGG, FLAC, AAC, 3GPP, Audio Format 1080P Decoding，YouTube 720P Decoding, Video Format HTML5, Flash 10.2，AVI, WMV, MP4, M4V, RV, RMVB, VP8, MKV, VOB, FLV, DAT, 3GP Picture Format JPG, BMP, PNG, GIF 2D/3D Graphic processor, support OpenGL...