Table of Contents
Advertisement
3
Press the following buttons to listen or to
change radio stations:
Button
Action
/
or
Select a preset radio station.
Alphanumeric
buttons
Navigation
Search for a radio station.
buttons (left/
right)
Navigation
Fine tune a radio frequency.
buttons (up/
down)
Press to stop the installation of
radio stations.
BACK
Press and hold to erase the
preset radio station.
OPTIONS Manual: Press once to access
program mode, and press again
to store the radio station.
Automatic: Press and hold for
three seconds to reinstall the
radio stations.
Listen to radio
1
Press SOURCE repeatedly until RADIO
appears on the display panel.
•
To listen to a preset station, press
or
.
•
To search for a radio station, and then
listen, press Navigation buttons (left/
right).
2
Press +/- (Volume) to change the volume.
EN
26
MP3 player
Connect your MP3 player to play your audio files
or music.
What you need
•
An MP3 player.
•
A 3.5mm stereo audio cable.
Play music
1
Connect the MP3 player to the home
theater as described in the quick start guide.
2
Press SOURCE repeatedly until MUSIC
I-LINK appears on the display panel.
3
Press the buttons on the MP3 player to
select and play audio files or music.
iPod or iPhone
When you connect a Philips dock for iPod/iPhone,
you can use the home theater to play music,
movies and photos from your iPod or iPhone.
What you need
•
A Philips dock (Model: Philips DCK3060).
•
A yellow composite cable.
Note
•
Charge your iPod/iPhone on the dock while
the home theater is in iPod mode.
Dock your iPod or iPhone
1
Move the slide at the bottom of the dock to
STANDARD, and then connect the dock to
the home theater.
2
Connect the yellow composite cable to the
dock and TV.
3
Switch on the iPod or iPhone, and place it
on the dock.
Advertisement
Table of Contents
