Advertisement
Quick Links
INSTRUCTION MANUAL
DVD/CD PLAYER
WITH iPod/iPhone DOCKING &
SD/MMC CARD READER
WITH PLL FM STEREO RADIO AND 3D SOUND
MODEL: IPT-223
Please read following instructions prior to operating your unit.
Manufacturer of this unit follows a principle of continuous improvement and has no responsibility for any
changes that are made to the unit nor any liability for these changes. Thanks for your choice of our
products.
For information and support, www.lenco.eu
0
1
2
6
7
8
9
10
26
1
3
4
5
27 18
Advertisement
Related Manuals for LENCO IPT-223
Summary of Contents for LENCO IPT-223
- Page 1 Manufacturer of this unit follows a principle of continuous improvement and has no responsibility for any changes that are made to the unit nor any liability for these changes. Thanks for your choice of our products. For information and support, www.lenco.eu...
- Page 2 MAIN UNIT CONNECT DVD PLAYER TO OTHER APPLIANCES 1. PREV/TUNE- BUTTON 15. EJECT BUTTON It is recommended you connect the player to a multi-system TV. Ensure that this player and other appliances (TV set and amplifier) that will be connected to the player 2.
- Page 3 SLEEP FUNCTION MUTE THE UNIT Press SLEEP button at power on mode. Each time SLEEP button is pressed, the display changes During playback, press MUTE button to switch off the audio. Press the button again to resume the Sleep time in a sequence as follows: audio.
- Page 4 REPEAT MP3/MPEG 4 PLAYBACK Press REP button during play, it will repeat play one chapter/title or repeat all (for DVD disc), or repeat 1. Load the MP3/MPEG 4 disc onto the disc tray. Then the TV screen will show its folders. play a track or all tracks (for CD), or press A-B button to repeat play the sections between two specific 2.
- Page 5 COMMON PROCEDURES FOR INITIAL SETTINGS 3.3 HUE - to set the colour impression for display. 1. Press SETUP button to access the setup menu. Options: -6/-4/-2/0/+2/+4/+6 2. Use the navigation buttons to select the item you want to modify, setting page with further setting 3.4 SATURATION - to set the saturation level for display.
-
Page 6: Specifications
SPECIFICATIONS Power source: AC 230V 50Hz Power consumption: 90W Remote control: Cell Battery CR2025 Receiving bands: FM 87.5 -108 MHz Speaker Size: AROUND 2.5 INCH SUB 6.5 INCH TV Output (DVD): NTSC/PAL Dimensions: 305(L) x 315(W) x 933(H) mm Operating Humidity Range: 10 % to 75 % Operating Temperature Range: +5°C to + 35°C Compatible with SD/MMC CARD Disc supportable: CD, CD-R, CD-RW, DVD, DVD-R, DVD-RW, DVD+R, DVD+RW...