Sony DXC-990 Manual page 18

4. Menu Function
DXC-990/990P
<ENHANCER>
>DETAIL
LEVEL
FREQUENCY
LINEAR MATRIX
MODE STANDARD
Select Back
<GENERAL>
>CCD MODE
SHADING COMP.
TRIGGER
NEGA
FLICKER CANCELLER
Select Back
<SYSTEM>
>BAUD RATE
D-SUB OUT
D-SUB VIDEO
D-SUB SYNC
RGB SYNC
12P CONNECTOR
Select Back
<SCENE FILE>
>FILE SELECT
LOAD
Select Back
16 – DXC-990/990P, DXC-390/390P Sales Manual
DXC-390/390P
[A] <ENHANCER>
ALL >DETAIL
± 0 LEVEL
MID FREQUENCY
ALL LINEAR MATRIX
MODE STANDARD
TARGET COLOR
Select
[A]
FIELD
OFF
OFF
OFF
OFF
[A]
9600
R/G/B
VBS
C.SYNC
G
IN
[A]
A
• DETAIL
[A]
ALL
± 0
• LEVEL
MID
• FREQUENCY
ALL
• LINEAR MATRIX Enables or disables processing of a color
ALL
• MODE
• TARGET COLOR Specifies the color for DETAIL or LINEAR
Back
(DXC-990/990P Only)
• CCD MODE Selects the CCD read-out mode
• SHADING COMP Eliminates color at the top and bottom of the screen
• LEVEL Adjusts the SHADING level
• TRIGGER Sets the polarity when connecting a slave unit to
synchronize with a stroboscope
• NEGA Reverses the output image to negative
• FLICKER CANCELLER Reduces flicker when SHUTTER is set to CCD IRIS or
OFF
• BAUD RATE Selects the baud rate
• D-SUB VIDEO Switches the video signal output from the D-sub 9-pin
• D-SUB SYNC Switches the sync signal from the D-sub 9-pin
• RGB SYNC Adds a sync signal to the RGB output
• 12P CONNECTOR Switches the input and output of the 12-pin connector and
selects the output signal
• H.PHASE Adjusts the horizontal phase when using the camera with
the external sync signal
• SC.PHASE ROUGH Roughly adjusts the subcarrier phase when using the
camera with the external sync signal
• SC.PHASE FINE Finely adjusts the subcarrier phase
• FILE SELECT Selects the file into which you store the setting
• LOAD Selects the type of setting to be stored, and loads it
Enables or disables adjustment of
sharpness of the image outline
Adjusts the sharpness of the image outline
Adjusts the sharpness of the detailed image
outline
matrix
Finely adjusts the color tone
MATRIX adjustments