Advertisement
Quick Links
Portable, single-channel, listen-only beltpack. High-quality audio receive circuit. Rugged low-profile metal case with sturdy belt
clip. Recessed volume control. Power on indicator. One 3-pin XLR connector for party line connection. ¼ inch phone jack for
earphone or earset. Uses same cables and wall plates as BP-1002. Powered from party line.
Features
Volume Control
Use this control to adjust the headphone/earset listen level.
On Indicator
This LED glows green when the belt pack is connected to an intercom channel that is functioning.
Headphone/Earset Connector
This connector accepts a wide-response earset, such as the Telex
phone plug.
Intercom Channel Connectors
The IFB-1000 intercom channel is connected via a 3-pin female connector. The IFB-1000 is powered from the intercom sys-
tem power supply and will turn on with the intercom system.
Clear-Com™ Compatible
Line Drawing
IFB-1000
Beltpack
EMV-2 (catalog number 60194-001), with a ¼" monaural
®
Advertisement
Summary of Contents for Audiocom IFB-1000
- Page 1 ® phone plug. Intercom Channel Connectors The IFB-1000 intercom channel is connected via a 3-pin female connector. The IFB-1000 is powered from the intercom sys- tem power supply and will turn on with the intercom system. Clear-Com™ Compatible Line Drawing...
- Page 2 IFB-1000 Specifications General Channel Supplied Power Requirements: +24 VDC nominal (standard Audiocom® line), 50 to 80 mA Environmental Requirements: Storage: -20°C to 80°C; 0% to 95% humidity, non-condensing Operating: 0°C to 50°C; 0% to 95 % humidity, non-condensing Dimensions: 3.25” (82.6 mm) high, 3.5” (88.9 mm) wide, 1.8” (45.7 mm) deep Weight: 1.0 pounds (0.45 kg)