Fm Radio - Truly Pic'N Roll MP310 Plus User Manual

c) Recording Settings
Recording settings includes: VAD setting and quality
setting.
Note: • VAD setting (only available the MIC is selected as the
recording source)
If VAD is turned ON, the player will not start recording
when you press "Start Recording", until the external signal
level exceeds a threshold that is set by the user; If VAD
is turned OFF, the player will start recording when you
press "Start Recording", even when there is no signal.
Quality setting: press [
desired quality, including low, medium, and high. The
higher the quality you select, the higher the quality the
final files will be. Press [ / ] button to return to the upper
level menu.
d) Line In recording
Connect this unit with external audio devices using the
supplied Line-in cable, which will avoid being interfered
by external noises. Press [Start Recording], then press
[ / ] button to start recording.
Note: • In the recoding setting menu, select LINE IN as the
recording source.
• The files will be saved as MP3 files in the Audio
directory in the order of AUDI001, V002.
• If the recording time is less than 2 seconds, the player
will not save the file and an error message will be
shown in the display.

7. FM Radio

a) Store a Station
Press [ ] or [ ] button to select Figure 18. If no station
is stored, press [ / ] button (Figure 19), press [ / ]
button to enter searching mode (Figure 20). Press [
or [ ] button to search a station, press [A-B] button,
the system will ask you whether to store the station. Press
[ / ] button to store the station. If there are stored
stations, the display will show Figure 21.
Figure 18
] or [ ] button to select the
Figure 19
b) Search a station
Manual Search
Automatic Search :
c) FM Recording
When in FM radio mode (Figure 21), press [A-B] button
to start recording. Press [ESC / ] button to stop recording.
Note: • The files will be saved as MP3 files in the Voice directory
in the order of FMRC001, 002.
d) Search Level
]
Figure 19 select [Search Level](Figure 22), press [
[ ] button to select search level. Press [ / ] button to
return to the upper level menu.
e) Delete A Station
Figure 23 press [A-B] button to delete a station, the system
will ask you whether to delete the selected station, press
[ / ] button to confirm your operation.
Figure 20
Figure 22
: Press [ ] or [ ] button.
Press and hold [ ] or [
Figure 21
Figure 23
] button.
] or
8