Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for CPE 2 STROKE GENERATOR
Summary of Contents for CPE 2 STROKE GENERATOR
- Page 1 10006 Santa Fe Springs Road Santa Fe Springs, CA 90670 USA Made in China Owner’s Manual and Operating Instructions SAVE THESE INSTRUCTIONS Important Safety Instructions are included in this manual 1000 Peak Watts / 800 Running Watts 2 STROKE GENERATOR...
-
Page 3: Table Of Contents
Table of Contents Introduction ........1 Storage ........... 12 Portable Power Generator ......1 Engine Storage ........12 Accessories ..........1 Generator Storage ........12 This Booklet ..........1 Specifications ......... 13 Manual Conventions ...... -
Page 5: Introduction
Champion Power Equipment manufactures Congratulations on your purchase of a and sells accessories designed to help you Champion Power Equipment generator. CPE get the most from your purchase. To find out designs and builds generators to strict more about our covers, power cables and specifications. -
Page 6: Manual Conventions
Manual Conventions CAUTION Manual Conventions CAUTION indicates a potentially hazardous This manual uses the following symbols to situation which, if not avoided, result in help differentiate between different kinds of minor or moderate injury. information. The safety symbol is used with a key word to alert you to potential hazards in operating and owning power equipment. -
Page 7: Safety Rules
Safety Rules Keep hands and feet away from rotating parts. Tie up long hair and remove jewelry. Safety Rules Operate equipment with guards in place. DO NOT wear loose-fitting clothing, dangling drawstrings or items that could become caught. WARNING DANGER Read this manual thoroughly before operating your generator. - Page 8 Safety Rules DANGER WARNING Fuel and fuel vapors are highly flammable and Rapid retraction of the starter cord will pull hand extremely explosive. and arm towards the engine faster than you can let go. Fire or explosion can cause severe burns or death.
-
Page 9: Controls And Features
Controls and Features Controls and Features Read this owner’s manual before operating your generator. Familiarize yourself with the location and function of the controls and features. Save this manual for future reference. Generator (1) Ground Terminal - Consult an (6) Choke Lever – Adjust lever to choke electrician for local grounding regulations. -
Page 10: Parts Included
Controls and Features Parts Included Your 42011 Two-Stroke Gasoline Powered Generator ships with the following parts: 3’ Charging Cord Spark Plug Socket 1 piece Handle Assembly 1 set Rev 42011-20090428... -
Page 11: Assembly
Assembly 6. Slowly add fuel/oil mixture to the tank. DO NOT overfill. Allow approximately Assembly ¼ inch of space for fuel expansion. 7. Screw on the fuel cap and wipe away any Your generator requires some assembly. It spilled fuel. must be properly serviced with fuel and oil mixture before operation. -
Page 12: Operation
Operation 2. Obtain an Uninterruptible Power Supply (UPS) device. Operation Most UPS devices come with a rechargeable battery between the electronic equipment and power supply Generator Location source. The device buffers the voltage Please consult your local authority. In some and protects against virtually all short- areas, generators must be registered with duration voltage fluctuations. -
Page 13: Do Not Overload Generator
Operation NOTE Do Not Overload Generator Starting watts can exceed three times the Capacity running watts. The values in the following table Follow these simple steps to calculate the are approximate. Refer to your tool or appliance for actual wattage consumption. running and starting watts necessary for your purposes. -
Page 14: Maintenance
Maintenance 5. Refer to the spark plug recommendation chart when replacing the plug. Maintenance 6. Carefully thread the plug into the engine. The owner/operator is responsible for all 7. Use the spark plug tool to firmly install periodic maintenance. the plug. WARNING 8. -
Page 15: Cleaning
Tampering with the governor can damage Water can enter the generator through the your generator and your electrical devices cooling slots and damage the generator and will void your warranty. CPE windings. recommends that you contact our service line at 1-877-338-0999 for all other service Use a damp cloth to clean exterior surfaces and/or adjustment needs. -
Page 16: Storage
Storage 5. Remove the spark plug and pour about Storage ½ ounce of oil into the cylinder. Crank the engine slowly to distribute the oil The generator should be started at least once and lubricate the cylinder. every 14 days and allowed to run for at least 6. -
Page 17: Specifications
Your generator comes equipped with a ¾” long reach plug (19 mm) Engine Specifications Intermittent use (less than 1 hour/month) or Engine 64 cc OHV CPE colder temperatures (below 60°F) NGK B6ES or equivalent Generator Specifications Running Wattage 800 Watts... -
Page 18: Parts Diagram
Specifications Parts Diagram Rev 42011-20090428... -
Page 19: Parts List
Specifications Parts List Item Part Number Description CT1E45FD-1000000 Engine, 2 Stroke GB1667-S6-16 Screw M6×16 CT1E45FD-1100001 Muffler Gasket Muffler CT1E45FB-1101000 Spark Arrester Assembly CT1E45FB-1101001 Cotter Pin 2.5×28 GBT91-CP2.5-28 GB1667-S6-12 Screw M6×12 CT950-04000002 Clip CT950-04000003 Fuel Tube CT950-04000200 Fuel Cock Gasket CT950-04000004 Handle CT950-04000005 GB1667-S6-30... - Page 20 Specifications Item Part Number Description GB1667-S4.2-9.5 Screw ST4.2×9.5 CT950B-05000005 Control Box Cover ST02FD-05302007-8 8 Amp Circuit Breaker ST168FD-1121100-C Engine Switch CT950-02000001 Condenser GB1667-S4.2-13 Screw ST4.2×13 Rev 42011-20090428...
-
Page 21: Wiring Diagram
Specifications Wiring Diagram Rev 42011-20090428... -
Page 22: Troubleshooting
Troubleshooting Troubleshooting Problem Cause Solution Generator will not start No fuel Add fuel Faulty spark plug Replace spark plug Unit loaded during start up Remove load from unit Generator will not start; Choke in the wrong position. Adjust choke. Generator starts but runs roughly Spark plug wire loose Attach wire to spark plug Out of fuel... -
Page 23: Warranty
Failures to due acts of God and other force Registration Card and a copy of your sales receipt majeure events beyond the manufacturer’s from one of CPE's retail locations as proof of control. purchase. Problems cause by parts that are not original Please submit your warranty registration and Champion Power Equipment parts. - Page 24 You are responsible for presenting your small off-road engine to an Authorized CPE service outlet, CPE dealer or CPE, Santa Fe Springs, Ca. as soon as a problem exists. The warranty repairs should be completed in a reasonable amount of time, not to exceed 30 days.
- Page 25 24 consecutive months thereafter. 2. GENERAL EMISSIONS WARRANTY COVERAGE CPE warrants to the original, end-use purchaser of the new engine or equipment and to each subsequent purchaser that each of its small off-road engines is: a.
- Page 26 TO OBTAIN WARRANTY SERVICE: You must take your CPE engine or the product on which it is installed, along with your warranty registration card or other proof of original purchase date, at your expense, to any Champion Power Equipment dealer who is authorized by Champion Power Equipment, Inc.
-
Page 27: Notes
Notes Notes Rev 42011-20090428...
Need help?
Do you have a question about the 2 STROKE GENERATOR and is the answer not in the manual?
Questions and answers