Advertisement
get
ready
UNPACK THE BOXES
Headrest frame
Chair frame
Head sock
Arm core
3/16-inch
Allen key
ATTACH THE BODY PAD
1. Slide the body pad onto the chair frame
Slide the body pad onto the lower part of the chair frame,
making sure that the frame slides into the fabric pocket located
on the bottom side of the pad.
2. Secure the body pad
Smooth the body pad into place, from the footrest toward the
backrest. The pad is automatically secured using the hook and
loop fasteners.
humantouch.com
Body pad
Arm cap (2)
Phillips-head
screwdriver
Head pad
Head pillow
Some pad sets include a separate
lumbar pillow instead of the upgraded
body pad with built-in lumbar support.
Lumbar pillow
4
Your Human Touch Perfect Chair
assembly. Just attach the headrest frame, pads, arm
core/caps, and head pillow, and you're done!
ATTACH THE HEADREST FRAME
1. Raise the chair to an upright position
For your convenience, and to better position the chair for the remaining assembly,
plug in the chair, then use the electric recline lever to adjust the chair to an upright position.
2. Remove the headrest frame screws
Using the Phillips-head screwdriver (provided), remove the two
screws from the headrest frame. Retain them for use in step 4.
3. Insert the headrest frame into the backrest frame
With the arc of the headrest frame pointing toward the back of the chair,
slide the two ends of the headrest frame into the open tube ends at the
top of the backrest frame.
4. Replace the headrest frame screws
Using a Phillips-head screwdriver, replace the two headrest frame
screws, securing the headrest frame to the backrest frame.
5
5
requires some simple
Advertisement
