Multi-Control Lever - Honda Automobiles 2011 Ridgeline Owner's Manual

Multi-Control Lever

1. OFF
2. INT: Intermittent
3. INT TIME ring
LO: Low speed
4.
HI: High speed
5.
6. MIST
7. Windshield washers
8. Turn signal
9. High beams
10. Flash high beams
94
The multi-control lever has many
functions, including windshield
wipers and washers, turn signals,
headlight high beams, and headlight
high beam flashing.
To select a position, turn the rotary
switch, push the button on the end of
the lever, or push the lever up, down,
forward, or backward.
The wipers are not activated.
OFF:
The length of the wiper
INT:
interval is varied automatically
according to the vehicle's speed.
Vary the delay by turning the INT
TIME ring. If you turn it to the
shortest delay, the wipers change
to low speed when the vehicle
speed exceeds 12 mph (20 km/h).
2011 Ridgeline
The wipers run at low speed.
LO
HI The wipers run at high speed.
The wipers run at high speed
MIST:
until you release the lever.
Windshield Washer: Push the
button on the end of the multi-
control lever. The washers spray
until you release the button. The
wipers run at low speed, then
complete one more sweep after
you release the button.