Display - Honda Automobiles 2008 CRV Manual

System Set-up

Display

There are two screen display modes:
Day Mode Night Mode
Day and Night. The recommended
setting is Auto, which automatically
switches the screen between Day and
Night modes as you turn the headlights
on or off.
You can select Day or Night mode to
override the Auto mode. This is a
useful feature for driver's that like to
use headlights during the day, and want
to temporarily override Night mode.
However, the screen in Day mode will
be extremely bright at night.
72 Navigation System
Display How setting affects
Mode display mode:
Auto Automatically
(factory switches between
default) Day and Night
mode by sensing if
the headlights are
on.
Day Stays in Day mode.
Night Stays in Night
mode.
Clock Turns the screen to
the clock screen.
To override setting while
driving:
Override night display:
With headlights on,
repeatedly press the gauge
brightness (+) button until
full bright.
Override day display:
Turn on the headlights and
ensure the dash brightness
is not at full bright.
Push and hold the joystick
for 10 seconds (switches to
Night mode).
Push and hold the joystick
for 10 seconds (switches to
Day mode).
To return to the previous
screen, press the NAVI
BACK button.
But remember:
Remember to adjust the
dash brightness back to
normal to allow auto
switching by sensing
headlights.
There is no auto Night/
Day mode change with
the headlights on/off.
You control the setting.
There is no auto Night/
Day mode change with
the headlights on/off.
You control the setting.
Touch any button to
return to your last
screen.