Electrical Connection - Hotpoint SE48101PX Operating Instructions Manual

Electrical Connection

Electrical connection
GB
! THIS APPLIANCE MUST BE EARTHED.
Connecting the power supply cable
_
$
Yellow-Green $
Electrical Connection:
4
N
omnipolar circuit breaker
4
Blue Brown
2
L
with a junction box
Power cable supply connection to the electrical
mains:
The plug must be accessible at all times.
Unplug the appliance before all operations, even
when replacing the oven lamp.
Using the appliance without correct earthing is
highly dangerous.
! After connecting the appliance to the flexible
cable, tighten all the screws on the terminal
board.
TABLE O. CHARACTERISTICS
width 43.5 cm
Dimensions * height 32 cm
depth 41.5 cm
Volume * 58 l
voltage: 220-240V
Electrical
maximum power absorbed
connections
2800 W
Directive 2002 40 EC on the
label of electric ovens.
Regulation EN 50304
ENERGY LABEL *
Declared energy
consumption for .orced
convection Class
heating mode:
This appliance conforms to
the following European
Economic Community
directives: 2006 5 EEC
dated 12 12 06 (Low
Voltage) and subsequent
amendments
2004 108 EEC dated
15 12 04 (Electromagnetic
Compatibility) and
subsequent amendments -
3 68 EEC dated 22 0
and subsequent
amendments.
2002 6 EEC and
subsequent amendments.
12 5 2008 stand-by off
mode.
* Without removable guide rails
50 60Hz
Gratin
3