JDS Uniphase SB Series User Manual page 15

Table 3: Operating Specifications
• Step-up, step-down channel selection
Local control
• Control of one external relay driver
• IEEE 488.1 address selection
• Return-to-local function
• Language selection
• GPIB interface:
Remote
control
•
Command set Revised command set. Capable of emulating command set of JDS
Uniphase SC-0 and SX-0 Series switch models.
Drivers Eight open collector outputs, sink current 100 mA maximum per output
(driver):
• Drivers 1, 2, 3, 4, +5V, and GND (ground) are accessible from back
• Drivers 5, 6, 7, and 8 are internal
• Driver 1 can also be controlled from the DRIVER1 key on the front panel
1
Warm-up time 1 hour at 25 °C ambient temperature
1
Applicable for optimum repeatability performance.
Table 4: Other Specifications
Electrical
Input voltage
Power consumption
Physical
Dimensions (W x H x D)
standard
with rack-mount kit
Weight
Environmental
Operating temperature
Storage temperature
Humidity
1
Rack-mount kit is optional.
IEEE 488.1 1987 capability SH1, AH1, T6, L4, SR1, PP0, DC1, C0, E1
RS232 interface:
setting 8 bits, 1200 baud, 1 stop bit, no parity
panel connector
100 to 240 V AC, 50 to 60 Hz
80 VA maximum
21.2 x 8.9 x 35.5 cm
1
48.3 x 8.9 x 35.5 cm
3.75 kg
0 to 55 °C
-40 to 70 °C
maximum 95% RH from 0 to 55 °C
General Information and Specifications – 10