Table of Contents
Advertisement
2.
ARCING PARTS:
Keep compressor at least 20 feet away from explosive vapors, such as when
spraying with a spray gun.
3.
IF CONNECTED TO A CIRCUIT PROTECTED BY FUSES:
Use time delay (Marked D) fuses with this item.
Connect to a dedicated power sources (see serial plate for proper voltage).
Check oil level in the compressor before each use and fill accordingly.
4.
RISK OF BURSTING:
Do not adjust the regulator to result in output pressure greater than marked
maximum pressure of attachment (air tools, etc).
5.
RISK OF INJURY:
Do not direct air stream at anyone's body.
Do not use compressed air for breathing.
Unplug the power cord and drain all air pressure from the tank before servicing
and after each use.
Always wear ANSI-approved eye protection.
Do not operate with supplied guards removed or damaged.
6.
RISK OF ELECTRIC SHOCK:
Do not expose to rain, store this item indoors in a dry location.
1.
Keep your work area clean and well lit. Cluttered benches and dark areas
invite accidents.
2.
Do not operate power tools in explosive atmospheres, such as in the
presence of flammable liquids, gases, or dust. Power tools create
sparks which may ignite the dust or fumes.
3.
Keep bystanders, children, and visitors away while operating a power tool.
Distractions can cause you to lose control. Protect others in the work area from
debris such as chips and sparks. Provide barriers or shields as needed.
SKU 94355
For technical questions, please call 1-800-444-3353
WORK AREA
PAGE 3
Hide quick links:
Advertisement
Table of Contents
