Advertisement
S
F
P
E
C
I
L
High Definition Home Cinema Projector
Power supply:
Power consumption:
Dimensions (W x H x D):
Weight:
Operating temperature:
Operating humidity:
Remote Control
Power supply:
Operating range:
Dimensions (W x H x D):
Weight:
Optional Accessories
*1: The projector uses a type of liquid crystal panel that typically consists of millions of pixels. This panel is built with very high-precision technolo-
gy designed to provide one of the finest possible images. Occasionally, a few pixels may remain turned on (bright) or turned off (dark). Please
note that this is an intrinsic characteristic of the manufacturing technology that affects all products using LCD technology.
*2: The projector uses a high-voltage mercury lamp that contains high internal pressure. This lamp may break, emitting a large sound, or fail to illu-
minate, due to impact or extended use. The length of time that it takes for the lamp to break or fail to illuminate varies greatly depending on
individual lamp characteristics and usage conditions.
*3: In AI mode
*4: Shift range is limited during simultaneous horizontal and vertical shifting.
*5: Lens and legs not included.
As of August 2006
E
100–240 V AC, 50/60 Hz
290 W (0.08 W in standby mode with fan stopped)
395 x 112 x 300 mm (15-17/32˝ x 4-13/32˝ x 11-25/32˝) *
4.9 kg (10.8 lbs)
0°– 40°C (32°–104°F)
20%–80% (no condensation)
3 V DC (AA battery x 2)
Approx. 7 m (23´) (when operated directly in front of signal
receptor)
48 x 138 x 28 mm (1-7/8˝ x 7-27/32˝ x 1-3/32˝)
125 g (4.4 oz.)
Replacement lamp: ET-LAX100
Ceiling mount bracket: ET-PKX100
Serial adapter: ET-ADSER (DIN 8-pin/D-sub 9-pin)
Weights and dimensions shown are approximate.
Specifications subject to change without notice.
PT-AX100
5
< 3 >
Advertisement
