User's Manual
Changing the battery
To install a battery, follow the steps below.
NOTE: Use only CR2025 batteries.
1. Slide the release latch and pull the battery tray out.
B
ATTERY TRAY
2. Seat a battery in the tray.
CAUTION: Make sure the positive pole, marked by "+" faces up.
3. Insert the tray and press to secure the latch.
CAUTION: The TOSHIBA Remote Control battery is a lithium battery,
which can explode if not properly replaced, used, handled or disposed
of. Dispose of the battery as required by local ordinances or regulations.
4-30
Figure 4-21 Removing the battery tray
Figure 4-22 Inserting the battery tray
R
ELEASE LATCH
CR2025
BATTERY