Page 1
MMD1040 DVD/CD Player with Stereo Radio/Clock INSTRUCTION MANUAL Thank you for your purchase of this Magnasonic product. Please read this Instruction Manual carefully before using product to ensure proper use. Keep this manual in a safe place for future reference.
MP3 Playback Kodak Picture/JPEG CD Picture CD Operation Setup and Personal Settings General Setup Audio Setup Video Setup Preferences Setup Digital Tuner Operation Basic Operation Setting Preset Radio Stations Auxiliary Input Disc Handling Precautions Troubleshooting Magnasonic Warranty - 2 -...
ATTENTION CAUTION: USE OF ANY CONTROLS, ADJUSTMENTS, OR PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED. REPLACE ONLY WITH THE SAME OR EQUIVALENT TYPE TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE WARNING: TO REDUCE THE RICK OF FIRE OR ELECTRICAL SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE...
Attaching the Speakers Note: The right and left speakers are NOT interchangeable. The left speaker only fits on the left side of the DVD player, and the right speaker only fits on the right side of the DVD player. Note: Please be sure that both speaker plugs are connected to the speaker jacks before unit is powered on.
Enabling/Disabling the Alarm 1. To turn on the alarm, while the DVD player is in standby mode, press ALARM SET until the clock icon appears in the LCD display. 2. The alarm will sound at your selected alarm time until the BUZZER OFF button on the remote is pressed.
Adjusting the Volume 1. To change the volume during playback, press the VOLUME UP or VOLUME DOWN buttons on the main unit or the remote. 2. The volume level will be displayed on the LCD screen. 3. To mute the volume, press the MUTE button on the remote. 4.
Search for a Scene 1. Press the SEARCH button on the remote and using the NAVIGATION buttons, choose whether you would like to search using title, chapter, title time, or chapter time. 2. Input the desired title or chapter number using the NUMERIC buttons on the remote Programmed Play (20 Programmable Memories) 1.
Note: This button will not work if there are no alternate language soundtracks. Multi-Angle Viewing (DVD Only) Press the ANGLE button on the remote while in playback mode to display number of angles available. Using the NAVIGATION buttons on the remote;...
Kodak Picture CD/JPEG CD Operation 1. Playback Mode – Press the REPEAT button on the remote to switch to repeat or repeat all. 2. Skip to Next/Previous Picture – Press the NEXT and PREVIOUS buttons on the main unit or remote to switch to the next or previous pictures.
When the DVD player is not in use for several minutes, a DVD logo screen saver will appear on the screen to protect the TV screen, when set to off the screen saver will never appear even when not in use. Audio Setup Down Mix Changes the way the DVD player plays sounds through the speakers.
DIGITAL TUNER (RADIO) OPERATION Basic Operation 1. Press the FUNCTION button on the main unit or remote to choose the Tuner function. 2. Press the STOP button on the main unit or remote to choose either AM or FM radio. 3.
DISC HANDLING PRECAUTIONS • Hold the disc by the edge to the surface will not be spoiled with finger prints. Dirt and scratched cause skipping and distortion, or may render the disc completely unreadable • Do not write on the label side with a ball-point pen or other writing utensils •...
MAGNASONIC product or the loss of information. The purchaser will be responsible for any removal, reinstallation, transportation and insurance costs incurred.
Need help?
Do you have a question about the MMD1040 and is the answer not in the manual?
Questions and answers