Kenmore 110.2982 series Quick Start Manual

We have taken great care to give your new washer the most convenient and easy-to-use features. Use this guide to help optimize the use of your
washer. Consult the Use and Care Guide for more detailed instructions. To contact the Sears Service Center, call 1-800-4-MY-HOME
Models/Modelos/Modèles 110.2982*, 2983*
START
Measure detergent and pour into washer.
Drop sorted load loosely into washer. Load evenly around
agitator to maintain balance.
Optional step: Pour measured liquid chlorine bleach into
the liquid chlorine bleach dispenser (on some models).
Optional step: Pour measured liquid fabric softener into
the fabric softener dispenser (on some models).
Close the lid.
Select Cycle, Water Level, Soil Level, Temperature,
and Rinse option based on your load.
Pull out Cycle Selector (Timer) knob to start.
Push in Cycle Selector (Timer) knob to stop the washer.
Auto Load Sensing Feature
Auto Load sensing fills the washer to the most efficient water level for the wash load. The machine will add water to a low water level and then agitate
for a short time to saturate the load. The washer then continues to fill to what the machine senses as the proper water level for the current wash load.
To insure the washer calculates the proper amount of water for the load size, do not open the lid or stop the washer once the wash cycle has started.
W10026675A
Quick Start Washer Guide

WATER TEMPERATURE CONTROL

• You should select the wash/rinse water temperature
based on the type of load you are washing.
• Always use the warmest wash water safe for fabric and
follow garment label instructions. For recommended use,
see the Use and Care Guide.
• Depending on location, water temperatures may vary
by season. The fill rate may also differ depending on the
water temperature selected.
FABRIC SOFTENER CONTROL
When using fabric softener, make sure to turn the
Fabric Softener knob to the Softener Added position.
(1-800-469-4663).
®
Continued on back