Physical Characteristics - Dell 2407WFP-HC User Manual

VESA, 1024 x 768 48.4
VESA, 1024 x 768 60.0
VESA, 1152 x 864 67.5
VESA, 1280 x 1024 64.0
VESA, 1280 x 1024 80.0
VESA, 1600 x 1200 75.0
VESA, 1920 x 1200 74.0
Electrical
The following table lists the electrical specification:
Video input signals
Synchronization input signals
AC input voltage / frequency / current
Inrush current

Physical Characteristics

The following table lists the physical characteristics:
Signal cable type
Dimensions (with stand):
Height (fully extended in portrait mode)
Height (compressed/locked in landscape
mode)
Width
Depth
Weight
Monitor (Stand and Head)
60.0 65.0
75.0 78.8
75.0 108.0
60.0 108.0
75.0 135.0
60.0 162.0
60.0 154.0
Analog RGB, 0.7 Volts +/-5%, 75 ohm input impedance
Digital DVI-D TMDS, 600mV for each differential line, 50 ohm input
impedance
S-video, Y input 1 volt(p-p), C input 0.286 volt(p-p), 75 ohm input
impedance
Composite, 1 volt(p-p), 75 ohm input impedance
Component: Y, Pb, Pr are all 0.5~1volt(p-p), 75 ohm input
impedance
separate horizontal and vertical,
3.3V CMOS or 5V TTL level, positive or negative sync.
SOG (Sync on green)
100 to 240 VAC / 50 or 60 Hz + 3 Hz / 2.0A (Max.)
120V: 40A (Max.)
240V: 80A (Max.)
D-sub: Detachable, Analog, 15pin, shipped attached to the
monitor
DVI-D: Detachable, Digital, 24pin, shipped detached from the
monitor
S-video: Not included with display
Composite: Not included with display
Component: Not included with
584.7 mm (23.0 inches)
387.9 mm (15.3 inches)
559.7 mm (22.0 inches)
195.0 mm ( 7.7 inches)
8.3 Kg (18.3 lb)
-/-
+/+
+/+
+/+
+/+
+/+
+/-
display