Daniel Hertz M5 Telikos Owner's Manual page 5

audio, Mark Levinson personally presents
the Daniel Her M5 Telikos as the single
ing ways:
Daniel Her speakers use high ef-
produces 100 dB of sound pressure level
(SPL). Listeners usually use only a fraction
of power could theoretically be required
for reproducing peaks of 126dB SPL with-
out clipping. The M5 has been optimized
4
sure the wide dynamic range.
The M5 has built-in active crossovers.
A toggle switch on the front panel allows
required. For example, the Daniel Her M1
quires two M5's. One is set to HPF, one is
- set to 0dB. This precisely matches the levels.
The M5 uses all discrete circuitry
with no chips. Daniel Her
discrete circuitry provides a new level of
sonic purity.
The M5 has no fans and operates with-
4 out excessive heat, yet is pure Class A up
112 dB SPL with Daniel Her
ers. This means that when driving Dan-
- iel Her speakers, the M5 provides pure
Class A operation for almost any program
material.
The M5 produces no audible noise, even
- iel Her M1, M2, M3, and M7, even with
your ear against the drivers. Until now,
- from audible noise from the power ampli-
0dB to -14dB in 1dB steps. This allows pre-
tions. For example, bi-amping the Daniel
proprietary Her M1 speakers, a level adjustment of
exactly 2dB can be achieved instantly.
The M5 has RCA connectors that al-
low easy daisy chaining so that multiple
gant way without ground loops.
A handmade torroidal transformer pro-
speak-
vides advanced power supply technology
for sonic purity.
Insulated output connectors meet the
latest standards for safety.
- Clear anodized aluminum and stain-
less steel screws are used throughout.
-
-
5