Safety Instructions - Bpidion SDP-704C User Manual

Safety Instructions

Precautions
Before using this unit please read these operating instructions carefully.
Take special care to follow the warnings indicated on the unit itself
as well as the safety suggestions listed below.
Afterwards keep them handy for future reference.
Safety
1. Power Source – The unit should be connected to a power supply
only of the type described in the operating instructions or as marked
on the unit.
2. Power Cord Protection – AC power supply cords should be routed
so that they are not walked on or pinched by items placed upon or
against them. Never take hold of the plug or cord if your
hands are wet, and always grasp the plug body when connecting
or disconnecting it.
3. Periods of non-use – When the unit is not in use turn of the power.
When left unused for a long period of time, the unit should be
unplugged from the household AC outlet.
Installation
1. Water and Moisture – Do not use this unit near water, for example,
near a bathtub, washbowl, swimming pool or the like.
Damp basements should also be avoided.
2. Heat – The unit should be situated away from heat sources such
as radiators and the like.
It also should not be placed in temperatures less than 5◦C (41◦F)
or greater than 35◦C (95◦F).
Placement
1. Ventilation – The unit should be situated so that its location or
position does not interfere with its proper ventilation.
2. Foreign Material – Care should be taken so that objects do not fall
into and liquids are not spilled into the unit. Do not subject this
unit to excessive smoke, dust, mechanical vibration or shock.
3. Stacking – Do not place heavy objects on top of the unit.
4. Surface – Place the unit on a at and level surface.
5. Wall or Ceiling mount – The unit should not be mounted on the wall
or ceiling unless speci ed in the operating instructions.
Maintenance
Do not use any type of abrasive pad, scouring powder or solvent such
as alcohol or benzene.
Website support : http://www.bpidion.net
1. The user can nd the latest version of software upgrade le.
2. Compatibility of memory card should be refered to the list on
the website.
3. Supprts other technical requirements or useful information for
using the products.
Service
1. Damage Requiring Service – The unit should be serviced
by a quali ed service person when :
a. The AC power supply cord or the plug has been damaged; or
b. Objects have fallen or liquid has been spilled into the unit; or
c. The unit has been exposed to rain; or
d. The unit does not appear to operate normally or exhibits
a marked change in performance; or
e. The unit has been dropped, or the enclosure is damaged.
2. Servicing – The user should not attempt to service the unit
beyond that described in the operating instructions.
All other servicing should be referred to quali ed service personnel.
3