Hotpoint S230G DY230G Instructions Manual page 24

CARE AND CLEANING
3. OVEN DOORS
CONTROL PANEL
TRIMS
4. REPLACEMENT OF THE OVEN LAMP
TOP OVEN LAMP
MAIN OVEN LAMP
5. HOW TO CLEAN THE LAMP LENS
TOP OVEN LAMP
MAIN OVEN LAMP
24
(a) Control Panel
Regularly wipe with a clean, damp cloth and polish
with a clean, dry cloth.
(b) Trims
Wipe over the trims with a clean, soft cloth wrung out in
warm water, or mild non abrasive cleaner. (If in doubt try
the cleaner on a small area of trim which is not notice able
in normal use), then after wiping with a cloth wrung out
OVEN
DOORS
in clear water, dry with a clean, soft cloth.
Regularly wipe stainless steel trims (if fitted) with a clean
damp cloth and polish with a clean dry cloth.
(c) Inner Door Panels & Glass
Open the door fully. The glass panel may now be washed.
Stubborn stains can be removed by using a well soaped,
fine steel wool soap pad.
DO NOT use scouring pads, or abrasive powder, which will
scratch the glass.
Warning:
To avoid an electric shock, ensure that the electricity supply
to the appliance is switched off and the appliance is fully
cold before removing lamp lens.
Open the oven door and remove the oven shelves.
Using a thick cloth, grip the lamp lens, unscrew anti-
clockwise and remove the lens.
Carefully unscrew the bulb anti-clockwise.
Fit replacement bulb (15W 300°C SES). and refit lens.
Warning:
To avoid an electric shock, ensure that the electricity supply
to the appliance is switched off and the appliance is fully
cold before cleaning lamp lens.
Open the oven door and remove the oven shelves.
Using a thick cloth, grip the lamp lens, unscrew anti-
clockwise and remove.
Clean with a non-abrasive cleansing cream and refit
lamp lens.
DO NOT use scouring pads, or abrasive powder, which will
scratch the glass lens