Chapter 3: Touch Screen Calibration; Installing And Calibrating The Touch Screen; Installing The Driver - NCR 5965 User Manual

3
Chapter 3:

Installing and Calibrating the Touch Screen

Installing the Driver

Touch Screen Calibration
Note: This chapter discusses calibration procedures using Hampshire, Version 6.31gs.
Be sure to observe for the following Touch Screen calibration guidelines:

Calibrate the touch screen as part of the installation process.

Recalibrate the touch screen when the system is installed at its final location.

Recalibrate whenever the terminal is moved to a new location.

Recalibrate the touch screen anytime the system has been disassembled for servicing.

Download the Calibration software from the NCR website.
http://www.ncr.com
a. At this site, select Support.
b. Under Related Items, Services; select
→
Files NCR RealPOS and SelfServ Peripherals
c. Download the Microchip Driver.
Note: If you have a previous version of another touch screen driver loaded on your system
you must completely remove it using the Control Panel Add/Remove program before
continuing with this installation process. Even though there is a message that it is not
necessary do perform a System Restart after removing the old driver.
1. Extract the driver installation files into to a working directory on the POS terminal.
2. Run the
Setup.exe
3. Welcome screen >
4. License Agreement screen > Accept,
Drivers and Patches
program from this directory.
Next
Next
→
Retail Support
→ → 5965.
Displays