Table of Contents
Advertisement
Main Menu
Table of Contents
The cooling system capacity is:
With automatic transmission:
1.43 US gal (5.4 , 1.19 Imp gal)
With manual transmission:
1.45 US gal (5.5 , 1.21 Imp gal)
17.
Start the engine and let it run for
about 30 seconds. Then turn off
the engine.
18.
Check the level in the radiator,
add coolant if needed.
R
R
E
E
S
S
E
E
19.
Fill the reserve tank to the MAX
mark. Install the reserve tank cap.
20.
Install the radiator cap, and
tighten it to the first stop.
21.
Start the engine and let it run until
the radiator cooling fan comes on
at least twice. Then stop the
engine.
22.
Remove the radiator cap. Fill the
R
R
V
V
E
E
T
T
A
A
N
N
K
K
radiator with coolant up to the
base of the filler neck.
23.
Start the engine and hold it at
1,500 rpm until the radiator fan
comes on. Turn off the engine.
Check the coolant level in the
radiator and add coolant if needed.
24.
Install the radiator cap, and
tighten it fully.
25.
If necessary, fill the reserve tank
to the MAX mark. Install the
reserve tank cap.
Cooling System
257
Maintenance
Advertisement
Chapters
Table of Contents
