Brake System Indicator - Honda 2004 Civic Sedan Owner's Manual

Main Menu Table of Contents

Brake System Indicator

The brake system indicator
U.S.
normally comes on when
you turns the ignition
switch ON (II) and as a
Canada
reminder to check the
parking brake. It will stay lit
if you do not fully release
the parking brake.
If the brake system indicator comes
on while drivinig, the brake fluid
level is probably low. Press lightly on
the brake pedal to see if it feels
normal. If it does, check the brake
fluid level the next time you stop at a
service station (see page 151
If the fluid level is low, take the
vehicle to your dealer and have the
brake system inspected for leaks or
worn brake pads.
184
Taking Care of the Unexpected
However, if the brake pedal does not
feel normal, you should take
immediate action. A problem in one
part of the system's dual circuit
design will still give you braking at
two wheels. You will feel the brake
pedal go down much farther before
the vehicle begins to slow down and
you will have to press harder on the
pedal.
Slow down by shifting to a lower
gear, and pull to the side of the road
when it is safe. Because of the long
distance needed to stop, it is
). hazardous to drive the vehicle. You
should have it towed and repaired as
soon as possible (see
Towing on page
If you must drive the vehicle a short
distance in this condition, drive
slowly and carefully.
Emergency
190 ).