Buick Acadia 2015 Owner's Manual page 43

2015 buick/chevrolet/gmc acadia/acadia denali/enclave/
Table of Contents

Advertisement

42
Infotainment System
desired button. Direct sunlight or
very bright light could affect the
ability of the RSE transmitter to
receive signals from the remote
control. If the remote control does
not seem to be working, the
batteries might need to be replaced.
See Battery Replacement later in
this section. Objects blocking the
line of sight could also affect the
function of the remote control.
If a CD or DVD is in the radio DVD
slot, the remote control
can be used to turn on the video
screen display and start the disc.
The radio can also turn on the video
screen display. See Overview on
page 5.
{
Caution
Storing the remote control in a hot
area or in direct sunlight can
damage it, and the repairs will not
be covered by the warranty.
Storage in extreme cold can
Caution (Continued)
weaken the batteries. Keep the
remote control stored in a cool,
dry place.
Remote Control Buttons
O
(Power): Press to turn the video
screen on and off.
Inserting a movie DVD will turn the
rear screen on automatically. If the
O
button
vehicle is shut off, after restarting,
the screen will have to be turned
back on again by using this button
to start watching the movie where it
left off.
(Illumination): Press to turn the
remote control backlight on and off.
The backlight automatically times
out after seven to 10 seconds if no
other button is pressed while the
backlight is on.
v
(Title): Press to return the DVD
to the main menu of the DVD. This
function could vary for each disc.
(Continued)
y
(Main Menu): Press to access
the DVD menu. The DVD menu is
different on every DVD. Use the
navigation arrows to move the
cursor around the DVD menu. After
making a selection, press the enter
button. This button only operates
when using a DVD.
n
q
p
o
,
,
,
(Menu Navigation
Arrows): Use the arrow buttons to
navigate through a menu.
r
(Enter): Press to select the
choice that is highlighted in
any menu.
z
(Display Menu): Press to adjust
the brightness or screen display
mode (normal, full, or zoom), and
display the language menu.
q
(Return): Press to exit the
current active menu and return to
the previous menu. This button
operates only when the display
menu or a DVD menu is active.

Advertisement

Table of Contents
loading

Table of Contents