D-Link GO-DSL-N151 User Manual page 18

After setting, click NEXT, the page as shown in the following figure appears.
In this page, enter SSID (Wireless Network Name) to identify your wireless
network. The default setting of the SSID is D-Link. Choose Authentication Type
for your wireless network. Auto-WPA/WPA2(Suggest) is recommended
because of higher security level. You can choose to click Auto generate the
WiFi key or enter your own Pre-Shared Key, then click NEXT
Click BACK to modify the settings.
Click NEXT to save the settings.
Click EXIT to cancel the settings.
Note:
After you saving the settings in the Quick Start page, you can view this wan
connection settings in the Interface Setup > Internet page.
GO-DSL-N151
15
User Manual