Yamaha RX-V777 Owner's Manual page 99

Menu Item
Network Connection
IP Address
Network Network Standby
MAC Address Filter
Network Name
Main Zone Set Zone Rename
Max Volume
Zone2 Set Initial Volume
Multi Zone
Zone Rename
Party Mode Set
Dimmer (Front Display)
Display Set Short Message
Wallpaper
Function Trigger Mode
Trigger Output
Target Zone
DC OUT Power Mode
Memory Guard
Auto Power Standby
ECO
ECO Mode
Language
Function
Selects the network connection method.
Configures the network parameters (such as IP address).
Selects whether to enable/disable the function that turns on the unit from other network devices.
Sets the MAC address filter to limit access to the unit from other network devices.
Edits the network name (the unit's name on the network) displayed on other network devices.
Changes the zone name (for main zone) displayed on the TV screen.
Sets the Zone2 maximum volume to prevent excessive loudness in the second zone.
Sets the Zone2 initial volume for when the unit is turned on.
Changes the zone name (for Zone2) displayed on the TV screen.
(RX-V777 only)
Enables/disables switching to the party mode.
Adjusts the brightness of the front display.
Selects whether to display short messages on the TV screen when the unit is operated.
Selects the image to be used as wallpaper on the TV.
Specifies the condition for the TRIGGER OUT jack to function.
Specifies the zone with which the TRIGGER OUT jack functions are synchronized.
Selects how to supply power through the DC OUT jack.
Prevents accidental changes to the settings.
Sets the amount of time for the auto-standby function.
Enables/disables the eco mode (power saving mode).
Select an on-screen menu language.
CONFIGURATIONS ➤ Configuring various functions (Setup menu)
Page
107
107
108
108
109
109
110
110
110
110
110
110
110
111
111
111
112
112
113
113
99
En