Connecting Playback Devices; Connecting Video Devices (Such As Bd/Dvd Players) - Yamaha RX-V777 Owner's Manual

1 2 3 4 5 6 7 8 9 10 11
4

Connecting playback devices

The unit is equipped with a variety of input jacks including HDMI input jacks to allow
you to connect different types of playback devices. For information on how to connect
an iPod or a USB storage device, see the following pages.
– Connecting an iPod (p.63)
– Connecting a USB storage device (p.66)

Connecting video devices (such as BD/DVD players)

Connect video devices such as BD/DVD players, set-top boxes (STBs) and game
consoles to the unit. Depending on the video/audio output jacks available on your video
device, choose one of the following connections. We recommend using an HDMI
connection if the video device has an HDMI output jack.
• If the combination of video/audio input jacks available on the unit does not match your video device, change
its combination according to the output jacks of your device (p.26).
■
HDMI connection
Connect a video device to the unit with an HDMI cable.
HDMI 1–5 jacks
HDMI 1 HDMI 2 HDMI 3
( BD/DVD )
The unit (rear)
HDMI 1 HDMI 2 HDMI 3 HDMI 4 HDMI 5
HDMI OUT
(BD/DVD)
1
ARC HDMI
ANTENNA
COMPONENT
(RADIO)
VIDEO
AM FM
P
R
P R
SPEAKERS
P
B
VIDEO VIDEO FRONT CENTER
CENTER CENTER
Y
MONITOR OUT
T VIDEO
SINGLE
1
2
ZONE 2 FRONT SURROUND SUR. BACK
O 1 AUDIO 2 AV 5 AV 6 SUBWOOFER
AV OUT ZONE OUT PRE OUT
If you select the input source by pressing HDMI 1–5, the video/audio played back on
the video device will be output from the unit.
• To watch videos input to the HDMI 1–5 jacks, you need to connect your TV to the HDMI OUT jack of the
unit (p.23).
HDMI 4 HDMI 5
HDMI output
HDMI
HDMI
Video device
■
Component video connection
Connect a video device to the unit with a component video cable and an audio cable
(digital optical or digital coaxial). Choose a set of input jacks (on the unit) depending on
the audio output jacks available on your video device.
Output jacks on video device
Video Audio
Digital optical
Component video
Digital coaxial
AV 1–2
(COMPONENT VIDEO)
The unit
jacks
(rear)
Y P P
B R
TRIGGER OUT
12V 0.1A
P
R
DC OUT HDMI 1 HDMI 2
5V 0.5A HDMI OUT (BD/DVD)
IN
P
B
2 1
ARC
OUT
Y
REMOTE
OPTICAL VIDEO
COMPONENT VIDEO
(TV) ANTENNA
AV4 (RADIO)
COAXIAL AM FM
AV3
Y P B P R
AV2
VIDEO VIDE
OPTICAL
AV 1 COMPONENT VIDEO MO
C C
AV2
ZONE
AUDIO 1 AUDIO 2 AV 5 AV 6 AV OUT ZONE
OPTICAL
O
AV 1
AV 1 (OPTICAL) jack or
AV 2 (COAXIAL) jack
If you select the input source by pressing AV 1–2, the video/audio played back on the
video device will be output from the unit.
• The component video signals (other than 480i/576i signals) input to AV 1–2 jacks of the unit can be output
from the MONITOR OUT (COMPONENT VIDEO) jacks only. To watch those videos, you need to connect
your TV to the MONITOR OUT (COMPONENT VIDEO) jacks of the unit (p.23). For details, refer to "Video
signal flow" (p.133).
PREPARATIONS ➤ Connecting playback devices
Input jacks on the unit
AV 1 (COMPONENT VIDEO + OPTICAL)
AV 2 (COMPONENT VIDEO + COAXIAL)
Video output
(component video)
COMPONENT
VIDEO
P
R
P
P B
R
P
B
Y
Y
Video device
COAXIAL
O
OPTICAL
Audio output
(digital optical or digital coaxial)
25
En