Table of Contents
Advertisement
1 2 3 4 5 6 7 8 9 10 11
1
Placing speakers
Select the speaker layout for the number of speakers that you are using and place the speakers and subwoofer (with built-in amplifier) in your room. This section describes the
representative speaker layout examples.
Caution
• Under its default settings, the unit is configured for 8-ohm speakers. When connecting 6-ohm speakers, set the unit's speaker impedance to "6 MIN". In this case, you can also use 4-ohm speakers as the front speakers.
For details, see "Setting the speaker impedance" (p.18).
Speaker type
Abbr.
1
Front (L)
Produce front left/right channel sounds (stereo sounds).
2
Front (R)
3
Center
Produces center channel sounds (such as movie dialogue and vocals).
4
Surround (L)
Produce surround left/right channel sounds. Surround speakers also produce surround back channel
sounds when no surround back speakers are connected.
5
Surround (R)
6
Surround back (L)
Produce surround back left/right channel sounds.
7
Surround back (R)
8
Surround back
Produces sounds mixed from surround back left/right channel sounds.
E
Presence (L)
Produce CINEMA DSP effect sounds. In combination with CINEMA DSP 3D (p.53), the presence speakers
create a natural 3-dimensional sound field in your room.
R
Presence (R)
Produces LFE (low-frequency effect) channel sounds and reinforces the bass parts of other channels.
9
Subwoofer
This channel is counted as "0.1". You can connect 2 subwoofers (with built-in amplifier) to the unit.
If you use five speakers in the front side, use two of them as front surround speakers (*1) or presence speakers (*2). We recommend using them as front surround speakers for
enjoying unprocessed playback (p.56) or presence speakers for enjoying stereoscopic sound fields (p.53).
• For information on the ideal speaker layout, see "Ideal speaker layout" (p.128).
• If you have seven speakers, use two of them as surround back speakers or presence speakers.
To reinforce the rear left/right sounds, use them as surround back speakers.
To create a natural 3-dimensional sound field, use them as presence speakers.
• Two subwoofers connected to the unit output the same sounds.
Function
Speaker system (the number of channels)
Front
7.1+2
7.1
7.1
6.1
5.1
4.1
5.1
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
1
*
●
●
●
●
●
●
1
*
●
●
●
●
●
●
●
2
*
●
●
2
*
●
●
●
●
●
●
●
PREPARATIONS ➤ Placing speakers
3.1
2.1
●
●
●
●
●
●
●
15
En
Hide quick links:
Advertisement
Chapters
Table of Contents
