Network; Audio Output; Network Connection; Ip Address - Yamaha RX-V777 Owner's Manual

■

Audio Output

Selects a device to output audio.
• This setting (except for "HDMI OUT2" [RX-V777 only]) is available only when "HDMI Control" is set to "Off".
Amp
Enables/disables the audio output from the speakers connected to the unit.
Settings
Off Disables the audio output from the speakers.
On Enables the audio output from the speakers.
HDMI OUT1, HDMI OUT2 (RX-V777 only)
HDMI OUT (RX-V677 only)
Enables/disables the audio output from a TV connected to the HDMI OUT jack.
Settings
Off Disables the audio output from the TV.
On Enables the audio output from the TV.
■
Standby Through
Select whether to output videos/audio (input through HDMI jacks) to the TV when the
unit is in standby mode. If this function is set to "On", you can use the input selection
keys (HDMI 1–5, V-AUX) to select an HDMI input even when the unit is in standby mode
(the standby indicator on the unit blinks).
Settings
Off Does not output videos/audio to the TV.
Outputs videos/audio to the TV.
On
(The unit consumes more power than when "Off" is selected.)
• This setting is available only when "HDMI Control" is set to "Off".

Network

Configures the network settings.
■

Network Connection

Selects the network connection method.
Settings
Select this option when you want to connect the unit to a network with
Wired
a commercially-available network cable (p.30)
Select this option when you want to connect the unit to a network via
Wireless (Wi-Fi) the wireless router (access point). For details on settings, see
"Connecting the unit to a wireless network" (p.43).
Select this option when you want to connect a mobile device to the
Wireless Direct unit directly. For details on settings, see "Connecting a mobile device
to the unit directly (Wireless Direct)" (p.48).
■

IP Address

Configures the network parameters (such as IP address).
DHCP
Select whether to use a DHCP server.
Settings
Does not use a DHCP server. Configure the network parameters
Off
manually. For details, see "Manual network settings".
Uses a DHCP server to automatically obtain the unit's network
On
parameters (such as IP address).
CONFIGURATIONS ➤ Configuring various functions (Setup menu)
107
En