Calibrating The Touch Screen - NCR RealPOS 5967 User Manual

Calibrating the Touch Screen

Before performing the calibration procedure please observe the following guidelines
for proper/improper methods of touching the screen.





Face the monitor directly.
Perform the calibration in the position (sitting or standing) that you normally
expect to use the touch screen.
Touch the calibration target firmly and precisely with your fingertip. During
calibration, be careful to keep your fingernails and other fingers away from the
touch screen as you touch each target.
The hand and calibration finger should be perpendicular (straight up) from the
touch‐screen during touch down and removal of the calibration finger. Keep the
other fingers closed and away from the touch‐screen.
Do NOT touch the display or bezel with your other hand.
Chapter 6: Touch Screen Calibration – Windows 6-3
27732
27733