Download Print this page

Panasonic PT-AE900U Brochure & Specs page 2

High definition home cinema projector
Hide thumbs Also See for PT-AE900U:

Advertisement

PT-AE900U
Producing stunning, superior images demands advanced technology
Producing stunning, superior images demands advanced technology
New Dynamic Iris for world's first* 5500:1 contrast ratio and
deeper, richer blacks
Dynamic Iris, with scene-tracking capability, was exclusively developed by Panasonic.
The iris range in the PT-AE900 is expanded by 30% compared to conventional models,
delivering a stunningly high contrast ratio of 5500:1 and blacks with a richness and
sharpness you'd expect to see only at the cinema.
* For an LCD projector producing 1,100 lumens or more, as of September 2005.
Cinema Color Management technology enables precise
color reproduction
Advanced color correction technology controls both contrast and brightness to
provide faithful reproduction of subtle hues. With Cinema Color Management
technology, correction of individual colors becomes possible without affecting the
colors in the surrounding parts of the picture.
New Smooth Screen technology delivers smoother and more
natural images
Producing smoother images, this technology eliminates the "chicken wire effect"
caused by black lines between pixels. This, combined with the new LCD panel of the
PT-AE900, removes the blurriness and flickering of horizontal black lines during vertical
panning.
New Dynamic Sharpness Control for crisp, natural images
Dynamic Sharpness Control adjusts the application of sharpness to neighbouring
picture elements—diagonally as well as vertically and horizontally adjacent pixels—in
response to differences in brightness. The PT-AE900 also has a newly redesigned
sharpness filter for images with even cleaner, sharper edges.
S P E C I F I C AT I O N S
Power supply:
100–240 V AC, 50/60 Hz
Power consumption:
180 W (Approx. 0.8 W in standby mode with fan stopped)
Optical system:
Dichroic mirror separation/prism synthesis system
1
LCD panel*
:
Panel size: 0.7˝ (diagonal) (16:9 aspect ratio)
Display method: Transparent LCD panel (x 3, R/G/B)
Drive method: Active matrix
Pixels: 921,600 (1280 x 720) x 3, total of 2,764,800 pixels
Pixel configuration: Stripe
Lens:
Manual zoom (1 - 2.0) / Manual focus
F 1.9 - 3.1, f 21.7 mm - 43.1 mm
2
Lamp*
:
130 W UHM™ lamp
Screen size:
1,016–7,620 mm (40–300 inches) diagonally, 16:9 aspect ratio
Colors:
Full color (1,070,000,000 colors)
Color system:
PAL, PAL-M, PAL-N, PAL 60, SECAM, NTSC, NTSC 4.43
Screen aspect ratio:
16:9 (4:3 compatible)
Brightness:
1,100 lumens*
3
Center-to-corner
uniformity ratio:
85%
3
Contrast:
5,500:1*
(full on/full off)
Resolution:
RGB: 1280 x 720 pixels (1920 x 1080 pixels with compression)
Scanning frequency:
RGB:
Horizontal: 30–70 kHz, Vertical: 50–87 Hz
YP
P
:
480i (525i): fH 15.75 kHz; fV 60 Hz
B
R
576i (625i): fH 15.63 kHz; fV 50 Hz
480p (525p): fH 31.5 kHz; fV 60 Hz
576p (625p): fH 31.25 kHz; fV 50 Hz
720p (750p): fH 45 kHz; fV 50 Hz
720p (750p): fH 45 kHz; fV 60 Hz
1080i (1125i): fH 33.75 kHz; fV 60 Hz
1080i (1125i): fH 28.125 kHz; fV 50 Hz
S-Video/Video:
fH 15.625 kHz; fV 50 Hz (PAL, SECAM, PAL-N)
fH 15.75 kHz; fV 60 Hz (NTSC, NTSC 4.43, PAL-M, PAL 60)
*1: The projector uses a type of liquid crystal panel that typically consists of millions of pixels. This panel is built with very high-precision technology to provide the finest possible image. Occasionally, a few pixels may remain turned on (bright) or turned off
(dark). Please note that this is an intrinsic characteristic of the manufacturing technology that affects all products using LCD technology.
*2: The projector uses a high-voltage mercury lamp that contains high internal pressure. This lamp may break, emitting a large sound, or fail to illuminate, due to impact or extended use. The length of time that it takes for the lamp to break or fail to
illuminate varies greatly depending on individual lamp characteristics and usage conditions.
*3: In AI mode
*4: Excluding protrusions
High Definition Home Cinema Projector
Easy to set up using 2x optical zoom lens and vertical and
horizontal lens shift
The 2x optical zoom lens allows the PT-AE900 to project a 100-inch (diagonal) big
screen image from a distance of as little as 3 meters to as far as an amazing 6 meters.
Vertical and horizontal lens shift allows you to adjust the positioning of the picture by
simple joystick operation without moving the projector. Technologies such as these
can accommodate any setup layout and screen dimensions.
One remote control does it all!
The PT-AE900 comes with a learning remote control that can memorise the functions
of up to eight home theatre components. Now you can control your entire home
theatre system with a single remote.
Optical axis shift:
Horizontal and Vertical
Horizontal: approx. ±30°
Keystone correction range:
Installation:
Ceiling/desk, front/rear (menu selection)
Language:
English, French, German, Spanish, Italian, Chinese, Korean, Russian, Swedish,
Danish, Norwegian, Polish, Czech, Hungarian, Portuguese, Thai
Terminals:
HDMI IN: 19-pin x 1
PC (RGB) IN: D-sub HD 15-pin (female) x 1
COMPONENT IN: RCA pin (Y, P
VIDEO IN: RCA pin x 1, 1.0 Vp-p, 75 Ω
S-VIDEO IN: Mini DIN 4-pin x 1, Y: 1.0 Vp-p, C: 0.286 Vp-p, 75 Ω
SERIAL (out): Mini DIN 8-pin (female) x 1 (RS232C based)
Power cord length:
3 m
Cabinet material:
ABS/PC
4
Dimensions*
13-3/16˝ x 3-23/32˝ x 10-5/8˝
(W x H x D):
(335 x 95 x 270 mm)
Weight:
7.9 lbs. (3.6 kg)
Operating environment:
Temperature: 32°–104°F (0°–40°C)
Humidity: 20%–80% (no condensation)
Remote Control Unit:
Power supply: 3 V DC (UM-3 (AAA) battery x 2)
Operation range:
Dimensions
(W x H x D):
Weight: 6 oz. (170 g) (including batteries)
Supplied accessories:
Power cord, Wireless remote control unit,
Batteries for remote control (UM-3 x 2)
Please contact Panasonic or your dealer for a demonstration.
Weights and dimensions shown are approximate. Specifications are subject to change without notice.
This product may be subject to export control regulations. UHM is a trademark of Matsushita Electric
Industrial Co., Ltd. Digital Light Processing, DLP, DLP logo and the DLP medallion are trademarks of Texas
Instruments. VGA and XGA are trademarks of International Business Machines Corporation. All other
trademarks are the property of their respective trademark owners. Projection images simulated.
R, G, B: 0.7 Vp-p (1.0 Vp-p for Sync on G), 75 Ω
HD/VD/SYNC: TTL, high impedance
(positive/negative polarity)
/C
, P
/C
) x 2,
B
B
R
R
Y: 1.0 p-p, 75 Ω
): 0.7 Vp-p, 75 Ω
P
/P
(C
/C
B
R
B
R
Approx. 7 m when operated from
directly in front of the signal receptor
2-1/20˝ x 7-27/32˝ x 1-1/8˝
(52 x 200 x 28.5 mm)

Advertisement

loading